I don't know what all of these commands do (you will notice yourself the new ones that you don't recognise), but the best way to figure them out is to run TF2 and open the developers console, then type the commands you are unsure about into the console. It will then paste back a setence or 2 for an explanation and a default value.
10-05-2007, 10:58 PM (This post was last modified: 10-05-2007, 10:59 PM by Muppet.)
Flak Wrote:No, removing those lines didn't help
okay, new server.cfg
Code:
// this is your server name as shown in the server list
hostname "BLA BLA BLA BLA"
sv_password ""
// your server password. a pair of double quotes means it is not set and anyone can join
// start rcon settings
rcon_password "BLA BLA BLA BLA"
// your rcon password to log into the dev rcon console or HLSW rcon console
sv_rcon_banpenalty 5
// Number of minutes to ban users who fail rcon authentication
sv_rcon_maxfailures 10
// Max number of times a user can fail rcon authentication before being banned
// end rcon settings
// start cvars for balancing un-even teams
mp_autoteambalance 1
// 0 is off and 1 is on. if 1 then should be used in conjunction with the following 3 commands
mp_autoteambalance_delay 60
// Time (in seconds) after the teams become unbalanced to attempt to switch players
mp_autoteambalance_warning_delay 30
// Time (in seconds) after the teams become unbalanced to print a balance warning
mp_teams_unbalance_limit 2
// Teams are unbalanced when one team has this many more players than the other (0 disables)
// end cvars for balancing un-even teams
// start cvars for round and game times
mp_enableroundwaittime 1
// Enable or disable timers to wait between rounds. 0 is off 1 is on
mp_bonusroundtime 20
// Time after round win until round restarts (in seconds)
mp_restartround 20
// Time the current round will restart (in seconds)
mp_stalemate_timelimit 120
// Timelimit (in seconds) of the stalemate round
mp_timelimit 30
// game time per map in minutes
// end cvars for round and game times
// start cvars for win conditions
mp_maxrounds 4
// Max number of rounds to play before server changes maps
mp_winlimit 3
// Max number of rounds one team can win before a server changes maps
// end cvars for win conditions
// start client specific cvars
mp_forcecamera 0
// force dead clients to first person mode disabling freelook. 0 is off 1 is on
mp_allowspectators 1
// enable or disable spectators on the server. 0 is off 1 is on
mp_friendlyfire 0
// 0 is off and clients can do harm to team mates. 1 is on and players can kill or injure team mates
mp_footsteps 1
// footsteps on or off. 0 is off and 1 is on
sv_cheats 0
// allow cheats to be used by the client. 0 is off 1 is on
sv_timeout 300
// the amount of time in seconds that a client is booted for no input
sv_maxspeed 320
// the maximun speed a client can move at
sv_consistency 1
// Force clients to pass a consistency check for critical files before joining server. 0 is off 1 is on
decalfrequency 10
// the pause in seconds between a decal being sprayed
// end client specific cvars
// start cvars for communication
sv_voiceenable 1
// allow players to use a microphone. 0 is off 1 is on
sv_alltalk 0
// toggles whether both teams can hear each others voice comms or not. 0 is off 1 is on. recommend it being off
mp_chattime 10
// players can chat for this amount of time (in seconds) after a game is over
// end cvars for communication
// start download cvars
sv_allowupload 1
// allow custom decals to be uploaded. 0 is off 1 is on
sv_allowdownload 1
// allow files to be downloaded from the server. 0 is off 1 is on
net_maxfilesize 15
// Max download file size. Default is 15
sv_downloadurl ""
//redirect download location
log off
// enable or disable server logging. on is on off is off
sv_logbans 0
// Log server bans in the server logs
sv_logecho 1
// Echo log information to the console. 0 is off 1 is on
sv_logfile 0
// Log server information in the log file. 0 is off 1 is on
sv_log_onefile 0
// log everything in one file
// end server logging
// start cvars for general operation
sv_lan 0
// is this an internet or LAN server. 0 is internet 1 is LAN
sv_region 3
// server location. -1 is the world, 0 is USA east coast, 1 is USA west coast, 2 south america, 3 europe, 4 asia, 5 australia, 6 middle east, 7 africa
sv_contact blah@blah.com
// contact email for sysop
sv_pausable 0
// enables or disables whether the server can be paused. 0 is off 1 is on
sv_pure 1
// forces all clients on the server to use content that matches what is on the server. 0 is off 1 is on
sv_pure_kick_clients 1
// kicks clients that do not have content that matches what is on the server
can't get the delay at the start of the round right, it has a 30 second delay but as soon as 2 players joins the game starts, any ideas what command i need to set?
10-10-2007, 04:55 AM (This post was last modified: 10-10-2007, 04:58 AM by chaoslord.)
Lupis Wrote:thanks for the config muppet, just got a question
can't get the delay at the start of the round right, it has a 30 second delay but as soon as 2 players joins the game starts, any ideas what command i need to set?
Also, with the 20 second restart time, I've found people with fast-loading computers are loading first, then capping some points before everyone is finished loading and in-game. 60 seconds (the default) should be left for this. The other guy that has admin on the server I run used your config and it was screwing people up. Thanks for the effort though. I also prefer a longer stalemate time, since 120 is a pretty small window, someone can hide pretty well for that long.
