06-21-2007, 03:03 PM
i have linksys WRT54G i tried everything cant get my server to show up how do i use the DMZ on this router i realy dont know how to enable it
tnx
tnx
using DMZ
|
06-21-2007, 03:03 PM
i have linksys WRT54G i tried everything cant get my server to show up how do i use the DMZ on this router i realy dont know how to enable it
tnx
06-21-2007, 04:20 PM
There should be just a button and an IP box for it but I'm not sure where it's hidden
Join the Source Dedicated Server Support Group on Steam Community!
Source Dedicated Server (SRCDS) Free to join, Live support! (When available) http://forums.srcds.com/viewtopic/5114
06-22-2007, 05:52 AM
i enabled the dmz but still cant find my server in master list and when i start the server in console it says Connection to Steam servers successful.
VAC secure mode is activated. it doesnt have the master lis ip underneath it like some ppl say it must have in order to be in master list any idea wat to do
06-22-2007, 08:03 AM
Some routers don't work...
routers suck, try to make a direct connection
Join the Source Dedicated Server Support Group on Steam Community!
Source Dedicated Server (SRCDS) Free to join, Live support! (When available) http://forums.srcds.com/viewtopic/5114 brutallica Wrote:i enabled the dmz but still cant find my server in master list and when i start the server in console it says Connection to Steam servers successful. That router model works fine with srcds servers. It's the same one I use and have no problems just using port forwarding.... Works in DMZ also just fine... What is your console startup line? What is the WRT54g firmware revision?
06-22-2007, 06:25 PM
Yes make sure you have set up the ports, duh I know, then make sure that they are configured to forward them to the machine running the server. You have to check some of the other options aswell. We had a situation where our Netscreen was dropping any packet it didnt recognise and as a result wouldnt let the servers connect.
Tinker Tinker Tinker my friend. Chances are there is something you have overlooked. Another Idea is making sure you put the -ip <your internal ip> -port <your game port> on the end of the shortcut just to make sure your game is running on the ports you want. DMZ is a last resort really and seeing as your router does seem to work with srcds I would think that is a config error in the router or on the executable.
06-23-2007, 05:01 AM
this is my command line C:\hlserver\srcds.exe -secure -game cstrike -pingboost 1 +map de_dust -maxplayers 16 -autoupdate -tickrate 60 -192.168.1.102 -port 27016
i add the ip and port to end of it still nothing also after i enable the dmz in the router do i still have to do any thing for the server |
« Next Oldest | Next Newest »
|