Posts: 79
Threads: 18
Joined: Feb 2009
Reputation:
0
Hej,
My server is placed in dk 100mbit/s
Serveren er:
Fujitsu Siemens RX300
2 x 2800 mhz xeon CPU (32 bit etach)
8 GB ram
6 Ultra 320 SCSI1 diske, 4 x 73 og 2 x 36 GB
raidcontroler
2 Unit server.
how many tick and slot is able on this server?
Posts: 63
Threads: 19
Joined: Oct 2008
Reputation:
0
i would say around 150 slots 100Tick
Posts: 7,778
Threads: 176
Joined: May 2008
Reputation:
83
1. One thread is enough!
2. Is that a new Xeon or an old one? (Model number, serial number).
Posts: 2,031
Threads: 27
Joined: Nov 2008
Reputation:
17
3. what quality do you want? high-quality war servers or medium-quality publics?
btw: slots are not the only limiting quantity. if you have 2 cpu-cores you can run at most 4 high-quality servers, regardless of the number of slots. for medium-quality 6 or 8 servers might be possible.
Posts: 2,031
Threads: 27
Joined: Nov 2008
Reputation:
17
Again: The clock speed is not proportional to the speed of a CPU, since Intel abandoned netburst. Run a real benchmark to compare the CPUs. Everything else is simply incorrect.
Posts: 125
Threads: 6
Joined: Dec 2008
Reputation:
1
Based on what the original poster had stated his processor is most likely older and most likely a dual xeon (2 cpu's on one mobo) there are too many factors to consider when measuring cpu's specially when your talking about comparing a single core to a multi core processor and when considering the big factors of today's cpu's is the process they are manufactured with intel is producing a 45nm process which is almost 3 times more transistors than its predecessor the 65nm process. Netburst was never even labeled as a negative or a downside to early cpu architecture infact the new core or peyrn (dont remember what they call it) architecture is based off a combination of netburst and p6 microarchitecture. There are also other things to consider such as the job at hand. Behaart you said your 1.77ghz core duo could out perform a pentium 4 3ghz but at what task??? multiple tasks I can say yes but one job at a time I doubt. Frequency is large factor of the processor when comparing to others, But again there is far too much to consider and the only real answer to this post is from the guy who has the server and knows the model numbers on those cpu(s).
*Windows lack of output*
You: Hey, I want to run this program!
Windows: Ok.. It crashed... Now what? Give up?
You:...wtf...
*linux output helpful?*
You: ./My_program
Linux:...Failed!...oo kitties!
You:...wtf...
Posts: 79
Threads: 18
Joined: Feb 2009
Reputation:
0
I baught the server, but its onley running 97-99 fps? :S What is rong? i launch the server whit -100tick and the fps gos 97-99 and 24% cpu load :S
Posts: 125
Threads: 6
Joined: Dec 2008
Reputation:
1
did you try fps_max 0 in console??
*Windows lack of output*
You: Hey, I want to run this program!
Windows: Ok.. It crashed... Now what? Give up?
You:...wtf...
*linux output helpful?*
You: ./My_program
Linux:...Failed!...oo kitties!
You:...wtf...