SRCDS Steam group


how many server can I run?
#1
How many cs1.6 and css servers can I run on this machine?
CPU: AMD Athlon 64 X2 5600+ Dual Core
RAM 2 GB DDR2 RAM
100mbit connection (no data traffic limit)
os: debian
Reply
#2
are u sure its 100mbit?
That seems like a hell of a lot.
~ trewq
Reply
#3
King Goilio Wrote:are u sure its 100mbit?
That seems like a hell of a lot.
100 MBit/s-bandwidth

but most inportant is how many servers I can run on this server

this is what I want:
2x cs1.6 public 32slots
1x cs1.6 public 20slots
1x css public 26 slots
(maybe when posible 1x cs1.6 public 10slots)

(if nessecry we can take 4gigs of mem.)
Reply
#4
...2.8GHz, 2x1MB, 1GHz Bus
i think
1hlds x32 will take about or more than half core and 0.5-1gb ram in week
1srcds x26 (tick66) will take the same or little more
1hlds x10 will take about 1/10 core and 100-200mb ram

u could have nice 1srcds x26 1hlds x32 and several hlds x10. want more - get quad and more ram. (and i prefare intel).
qx6850(3.0ghz/1333)/4gb(ddr2-800)/100mbps/centos5.1
srcds-64slots/66tick/VAC/detox/SB/mm/sourcemod
2xhlds-32slots/VAC/hlguard/SB/meta/amxx
Reply
#5
navarra Wrote:...2.8GHz, 2x1MB, 1GHz Bus
i think
1hlds x32 will take about or more than half core and 0.5-1gb ram in week
1srcds x26 (tick66) will take the same or little more
1hlds x10 will take about 1/10 core and 100-200mb ram

u could have nice 1srcds x26 1hlds x32 and several hlds x10. want more - get quad and more ram. (and i prefare intel).
oke thx Wink

a other question
I will get a 50MBit connection at my home soon, how many server can I host on a 50MBit connection (when its a lot I buy a server and host it at homeWink )
Reply
#6
50 Mbit upload? If so, a lot Smile.
realchamp Wrote:
Hazz Wrote:Has someone helped you on these forums? If so, help someone else
Mooga Wrote:OrangeBox is a WHORE.
Reply
#7
rofl, that would be insane.. the cost of a connect like that to your house...
Reply
#8
upload-from-server - 25kb/s max for hlds, and srcds - all demand on maxplayers. 25kb/s for 20 slots are good, but as i heard - 1mbit available from srcds engine. so, if u have choke in round start, strong fight - u should enlarge maxrate. 25kb/s= sv_maxrate 25000
50mbits are good for your config
download-to-server: less speed required, 10kb/slot hardcorded to hlds and i not sure about srcds, but the same almost. do not forget it.

also do not forget include electrical issure to your specs if u run server at home. Big Grin
qx6850(3.0ghz/1333)/4gb(ddr2-800)/100mbps/centos5.1
srcds-64slots/66tick/VAC/detox/SB/mm/sourcemod
2xhlds-32slots/VAC/hlguard/SB/meta/amxx
Reply
#9
Well 50mpbs connection to your home would take a custom fiber line install which is at least $20-30k less you live with a fiber line below your house or something. Smile
A T-1 line is only dedicated 1.5mpbs up and down.
If you have that high five. Big Grin
I only would dream about 50mbps from home.
Reply
#10
ClanWoof Wrote:Well 50mpbs connection to your home would take a custom fiber line install which is at least $20-30k less you live with a fiber line below your house or something. Smile
A T-1 line is only dedicated 1.5mpbs up and down.
If you have that high five. Big Grin
I only would dream about 50mbps from home.
yes there is a fiber line in my place, there are only 6 places in my country. and I live in one of them
Reply
#11
outside of north america, uncapped 10mbit lines and greater is very common. for VERY fair prices. The cost of home broadband is extremely inflated in the US.
Reply
#12
HBS|Ryan Wrote:outside of north america, uncapped 10mbit lines and greater is very common. for VERY fair prices. The cost of home broadband is extremely inflated in the US.
here in the Netherlands most of the internet connections are 20MBit (download) and upload is very low (2mbit)
only company's and people with fiber have faster upload
Reply


Forum Jump:


Users browsing this thread: 7 Guest(s)