SRCDS Steam group


Tutorial: How to setup a TF2 server
#16
Thanks for this Tut and everything, but the update tool keeps stopping at 67.06%

I don't want to have to keep waiting until it get's to that point just to see it stop again...

I've done it 3 times and all 3 stopped there :S

Edit: ok, nevermind lol, i got the server installed, now i can't find the server config file, anyone able to point me in the right direction? Smile

Edit: Hahaha it's ok, i've worked that out too haha, thnx for the tut Wink
Reply
#17
Configuration section updated with a generic version of the config file.
Reply
#18
Beck Wrote:Configuration section updated with a generic version of the config file.
Ill give these configs a whirl in about 2 weeks.
Reply
#19
Beck may I ask you, when you update it, can you update the sticky I made too?

Thanks Wink

Good job on the tutorial by the way!
Join the Source Dedicated Server Support Group on Steam Community!
Source Dedicated Server (SRCDS)
Free to join, Live support! (When available)

http://forums.srcds.com/viewtopic/5114
Reply
#20
Drocona Wrote:Beck may I ask you, when you update it, can you update the sticky I made too?

Thanks Wink

Good job on the tutorial by the way!
Sure....I just thought the Sticky refered to the original post Wink
Reply
#21
could someone pls tell me if there is something i can type in the server.cfg or in game that will change the max amount of players?

Edit: This is because we are using the source server not the update tool, thnx
Reply
#22
maxplayers <#here> in the server.cfg MIGHT work, I'm not sure tho

if it doesn't try enter it in the valve.rc file
Join the Source Dedicated Server Support Group on Steam Community!
Source Dedicated Server (SRCDS)
Free to join, Live support! (When available)

http://forums.srcds.com/viewtopic/5114
Reply
#23
Yo dude that's no good :S

I tried what you said and it keeps automatically changeing it back to 24, even if i set the srcds to 32, i did this as an example ingame...

[Image: only24gv6.jpg]

See, i type 64 and it sets it to 24, as does 32, if anybody has any ideas please help, we run a 100meg fibre server and could raise the bar quite a bit...
Reply
#24
ciarlo2006 Wrote:Yo dude that's no good :S

I tried what you said and it keeps automatically changeing it back to 24, even if i set the srcds to 32, i did this as an example ingame...

[Image: only24gv6.jpg]

See, i type 64 and it sets it to 24, as does 32, if anybody has any ideas please help, we run a 100meg fibre server and could raise the bar quite a bit...
I dont think its possible to run more than 24 at this point in time.
Theres some "hacks" on the official forums that will allow you to run 32.
But...thats just off the top of my head
Reply
#25
I have it all up and running (Thanks a million for the how-to) but the server is showing up as only a LAN server. How do I make it an Internet sever?
Reply
#26
Marinegunrock Wrote:I have it all up and running (Thanks a million for the how-to) but the server is showing up as only a LAN server. How do I make it an Internet sever?

You can type in the console sv_lan 0
Reply
#27
ciarlo2006 Wrote:
Marinegunrock Wrote:I have it all up and running (Thanks a million for the how-to) but the server is showing up as only a LAN server. How do I make it an Internet sever?

You can type in the console sv_lan 0

I've done that, but it still shows up in LAN games. However, I'm not using a console - I'm running it from the command prompt - maybe that's my issue? If so, how do I run it from a console?
Reply
#28
Marinegunrock Wrote:
ciarlo2006 Wrote:
Marinegunrock Wrote:I have it all up and running (Thanks a million for the how-to) but the server is showing up as only a LAN server. How do I make it an Internet sever?

You can type in the console sv_lan 0

I've done that, but it still shows up in LAN games. However, I'm not using a console - I'm running it from the command prompt - maybe that's my issue? If so, how do I run it from a console?

It's the same as far as i know, type in the cmd box that opens, i think that's possible
Reply
#29
It's the same as far as i know, type in the cmd box that opens, i think that's possible
[/quote]

Well, if it doesn't matter, then it's simply not working. Maybe there's a line I can add to the .cfg or something?
Reply
#30
Marinegunrock Wrote:It's the same as far as i know, type in the cmd box that opens, i think that's possible

Well, if it doesn't matter, then it's simply not working. Maybe there's a line I can add to the .cfg or something?
[/quote]
Did you try and add the "sv_lan 0" to the cfg file.

Are you sure its executing the cfg file?
Reply


Forum Jump:


Users browsing this thread: 19 Guest(s)