OpenBridge Designer CONNECT Edition 2022 Release 2 (10.12.01.073)

[Fullwarezcrack]

Free Download OpenBridge Designer CONNECT Edition 2022 Release 2 | 4.6 Gb
Product:OpenBridge Designer (OBD)
Version:CONNECT Edition 2022 Release 2 (10.12.01.073)
Supported Architectures:x64
Website Home Page :www.bentley.com
Languages Supported:english
System Requirements:Windows *
Size:4.6 Gb

The Bentley Systems Incorporated development team is pleased to announce the availability of OpenBridge Designer CONNECT Edition 2022 Release 2 (10.12.01.073) is a unique application that combines modeling, analysis, and design into one comprehensive bridge product.

What's New in OpenBridge Designer (OBD) CONNECT Edition, 2022 Release 2
This topic summarizes the new enhancements in OpenBridge Designer (OBD) CONNECT Edition 2022 Release 2 and its components OpenBridge Modeler (OBM), RM Bridge, LEAP Bridge Concrete (LBC), and LEAP Bridge Steel (LBS).

OpenBridge Designer (OBD) CONNECT Edition 2022 Release 2 (v10.12.01.) and its components OpenBridge Modeler (OBM), RM Bridge, LEAP Bridge Concrete (LBC), and LEAP Bridge Steel (LBS) contains the following enhancements and error corrections:
1. Enhancements in OpenBridge Designer:
- Added a checkbox in transfer dialogue to initialize the RM folder under BIM workflow
For BIM and Standalone workflow is now introduced one checkbox for automatically initialize Analyzer data. When big changes are introduced in the physical model, the User can automatically initialize the analytical structural model in RM>Analyzer




- Added ProjectWise Drive to OBD installer as a companion
- Restrict using special characters in file names - \ / : ? " < > |
- OBM-RM - Added capability to transfer pipe piles
- OBM-RM - Added capability to transfer custom footings and attached piles
It was enhanced the capability to transfer custom footings and piles to RM for analysis

xOpenBridge Designer CONNECT Edition 2022 Release 2

Close
- OBM-RM - Enhance abutment transfer by creating it as a pier with footings and piles if they exist
Abutments modeled in OpenBridge Modeler with piles and footings can now be transfer to RM Bridge as pier elements, for analysis.
OBM model


RM Bridge model


- OBM to RM: Transfer issues - cross section mesh and negative length on link elements
It was fixed the issue on transfering cross section for cross frame elements. The boundary points were outside of the boundary line and the meshing was wrong, this is now corrected. Also, on transfering to analyzer at begin and end of the bridge link elements were giving negative length values, that were solved.
OBM model


RM Bridge model




- PSC Girders OBM to RM: MG with no materials
For Precast Prestressed Concrete Girder Bridges, it was assigned materials to girders and deck slab defined in OBM, when transfering the bridge model from OBM to RM Bridge.
2. Enhancements in the Components:
2.1 OpenBridge Modeler (OBM)
- Model Single Beam in Beam and Slab type Bridges
- Model Barriers on Wing Walls
- Specify Barrier End Cut Orientation at each end
- Improved Bearing Elevations (Properties and Reports)
- Automated 2D Decorations for Bearings and Bearing Seats
- Transverse Offset for Wing Walls
- Expanded Steel Tubs Properties
- Field Splice: Inner Splice Plate now optional
- Improved Superstructure C/S Drawings, PGL and Slope
- Accurate Modeling of Haunch for Open Concrete Tubs
- Option to Slope Crown Cap Bottom
- Improvements to Footing Elevation Constraints and DTM
- Option to Slope between Bearing Seats
- Skew Solid option for Tapered Caps and Inverted Tee Caps
- Improvements in Generative Components workflow
- Accurate Excavation for Custom Footings
- Misc. Enhancements (minor):
. Show Direction/Bearing in Pier/Abutment Report
. New option for "Create HEC-RAS Data" under Civil Analysis
2.1.1 Technology Stack
- MicroStation PowerPlatform Update 17.2 (v10.17.2.454)
- Civil Platform (10.12.1.169)
- OpenRoads 2022 Release 2 (v10.12.1.59)
- ProStructures Update 7.2 (v10.07.2.18)
- Certified with PW v10.00.03.453
- Generative Components (v10.17.2.18)
- GINT (10.7.1.1)
- Descartes (10.17.2.61)
- CONNECTION Client (11.00.05.44)
2.2 RM Bridge Enterprise
- Spring connections in Modeler prepared for FEM models.
The spring connections in Modeler have been enhanced for finite shell models. The options available in springs connected to zero were extended to spring elements connecting two different nodes, too. In this way, the User will have several possibilities of connections, whether in a complete FEM model, or in a Hybrid model, such as deck modelled with FEM and Piers with beams and/or vice-versa.




- Eigen schedule action and Mass Participation Factors for Rotations
As asked by several of our Users, it was introduced in RMv11.16 the calculation of the mass participation factors for rotations in the eigen analysis. Now, Users can have access to mass participation factors in global translations, X, Y, Z and global rotations, RX, RY, Rz. Results can be seen in Main View and in the output *.lst file.




2.3 LEAP Bridge Concrete (LBC)
- Enhancements for PennDOT
. Show PennDOT DM-4 reference articles in design reports
. Custom maximum permitted spacing of shear connectors per PennDOT DM-4
- Other enhancements
. Interoperability to read substructure from OBM in the view of both Upstation and Downstation
. Support new deformed steel reinforcement per ACI
. Allow users to specify girder type as either adjacent or spread box girder for live load distribution factor calculation purpose
2.4 LEAP Bridge Steel (LBS)
- Enhancements for PennDOT
. Inclusion of self-weight of filed splice in analysis and design
. Renaming deadload of wearing surface and utility to add clarity in the load combinations
. Support the load rating of the PennDOT custom load group STR-IP
. Custom shear correction factor for live load distribution factors when there is a skew
- Other enhancements
. New reaction reports due to live load without impact at supports
. Support fatigue checking category E' for bolted connection option in cross-frame fatigue check
. Support wind load in construction stages
. Support auto generation of load effects for haunch
3. Error Corrections in the Components:
3.1 RM Bridge
- FEM models and Spring-0 not connecting to the closest node. For a FEM model and in RM > Modeler, it is fixed the issue related with Spring-0 when chosen the option "Automatic connection to closest FE node". RM > Modeler


RM > Analyzer


- Users Area and Line integral results wrongly displayed around rigid connections.
Fixed the issue related with Users Area and Line integral results presentation in the Main View when a FEM model with rigid connections is performed.
- Strange lines appear in FEM integral results when rigid connections were used.
Fixed the issue with FEM integral results presentation in Main View, when a FEM model with rigid connections is performed.
- Accidental deviation angle β unit was corrected considering the User-defined Units.
Fixed the issue with accidental deviation angle β unit, when were used Userdefined system units.
- Fixed the Prestressing Training Example Error.
Fixed the issue with the Prestressing training example calculation error.
3.2 LEAP Bridge Concrete (LBC)
The following issues are fixed:
- Bearing to bearing distance was unexpected changed automatically after sacrificial thickness was being saved in Precast/Prestressed Girder module.
- Steel reinforcement of the column or pile was not being correctly retained in Substructure module.
- Incorrectly shear diagram was presented when a point load was applied between the 10th points along the span length in Precast/Prestressed Girder module.
- Load effects due to wind load on structure were incorrectly generated for column of the hammer head pier in Substructure module.
- Referenced equation numbers were not updated to LRFD 8th and 9th editions in detailed loss report in Precast/Prestressed Girder module.
- Incorrect diagram was reported under Fatigue limit state in Precast/Prestressed Girder module.
- Clarity of ADTT load effect was missing in the live load distribution factor report in Precast/Prestressed Girder module.
- The program crashed when a user tried to create a new Superstructure only model using a X Beam in Precast/Prestressed Girder module.
- Incorrect truck information was reported in the live load details reports of both design and fatigue live loads in Substructure module.
- Load effects due to axial force were not correctly considered for shear rating in CIP RC/PT Girder module.
3.3 LEAP Bridge Steel (LBS)
The following issues are fixed:
- Incorrect version number was shown in design report.
- Graphic issue related to field splice and bolts.
- Incorrect category was used under the conditions of positive flexure compact or non-compact section.
- Cross frame design did not honor the material's Modulus of Elasticity.
- User defined hinges showed up in the incorrect span.
- Error message popped up when a user tried to add generic shear studs into a model.
- Live load analysis did not show meaningful results for line girder analysis when a hinge was defined.
- The program failed to identify the beginning of the slab because of the overhang and the related analytical process did not include deck for the composite action.
- The program incorrectly showed jagged diagrams for live load analysis when FEM was being used.
- Wind load pressure was not correctly transferred internally for calculation of the related load effects.
- Truck position was missing in the live load detailed report.
- Incorrect haunch thickness was incorrectly shown in the 3D model.
- Failed to correctly perform the girder spacing check for steel tub girder bridge models.




OpenBridge Designer CONNECT Editionis a suite of products that encompass both the modeling and design of bridges. OpenBridge Designer CONNECT Edition is a unique application that combines modeling, analysis, and design into one comprehensive bridge product. The application utilizes the modeling capabilities of OpenBridge Modeler and the analysis and design features of LEAP Bridge Concrete, LEAP Bridge Steel and RM Bridge to meet the design and construction needs of all types of bridges. OpenBridge Designer offers direct interoperability for analysis and design, produce detailed reports, clash detection and construction simulation, quantities, geometry reports, and more. The application provides 3D parametric modeling, analysis, and load-rating software for bridges. Integrates with OpenRoads design applications, ProStructures for concrete rebar detailing and LumenRT for leveraging enhanced visualization.
What's New in OpenBridge 2022 Release 2
Bentley Systemsis a software development company that supports the professional needs of those responsible for creating and managing the world's infrastructure, including roadways, bridges, airports, skyscrapers, industrial and power plants as well as utility networks. Bentley delivers solutions for the entire lifecycle of the infrastructure asset, tailored to the needs of the various professions.

Quote:Rapidgator
http://peeplink.in/a3a262b3a6ce
Peeplink Password: 123
Uploadgig
z7wo8.setup.part1.rar
z7wo8.setup.part2.rar
z7wo8.setup.part3.rar
NitroFlare
z7wo8.setup.part1.rar
z7wo8.setup.part2.rar
z7wo8.setup.part3.rar

Links are Interchangeable - Single Extraction