Server not functioning outside of LAN

[Kilvanys]

I'm new to running a server and cannot get it online. it does function over LAN.

Basic Info
Server OS: Windows 7 ultimate x64
Processor: i7-2600k 8 logical cores, 4 physical, 3.70 GHz
Ram: 8GB
Game: Team Fortress 2
Start Up Command: c:\HLServer\orangebox\srcds.exe -console -game tf -hostport 27015 +maxplayers 24 +map ctf_2fort
No Mods

NETWORK AND BANDWIDTH INFO
Bandwidth: 14.43 Mbps down, 15.89 Mbps up
Router: Linksys WRT54G version 6 (normal firmware)
Local IP:192.168.1.87
Forwarding port 27015 TCP and UDP
[Verizon Router]-Ethernet-v-----Coax------v
[Server] -->[Linksys Router] -Ethernet-> [Modem] --> [Internet]
Basically the coax cable from the modem runs to the verizon router which acts as a bridge, and the ethernet cable from the modem runs to the linksys router
I am NOT playing on the computer that is hosting.

when it starts to run, the console says

Quote:Console initialized.
Game.dll loaded for "Team Fortress"
Particles: Missing 'particles/error.pcf'
maxplayers set to 24
No '-replayserverdir' parameter found - using default replay folder.
Replay: Creating thread pool...Replay: Starting thread pool with 4 threads...
succeeded.
Unknown command "r_decal_cullsize"
maxplayers set to 24
Network: IP 192.168.1.87, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
Executing dedicated server config file
Failed to load Steam ServiceServiceStart: failed to start--------------------------------------------------------
sv_pure set to 1.
Note: Changes to sv-pure take effect when the next map is loaded.
--------------------------------------------------------
exec: couldn't exec ctf_2fort.cfg
Connection to Steam servers successful.
Vac Secure mode is activated.

My server.cfg is

Code:

hostname "****"
sv_password "****"
rcon_password "****"
sv_rcon_banpenalty 5
sv_rcon_maxfailures 10

mp_enableroundwaittime 1
mp_bonusroundtime 20
mp_restartround 20
mp_stalemate_timelimit 120
mp_timelimit 300
mp_disable_respawn_times 1

mp_maxrounds 4
mp_winlimit 3

mp_forcecamera 0
mp_allowspectators 1
mp_friendlyfire 0
mp_footsteps 1
sv_cheats 0
sv_timeout 300

sv_consistency 1
decalfrequency 10

sv_voiceenable 1
sv_alltalk 1

mp_chattime 10

sv_allowupload 1
sv_allowdownload 1
net_maxfilesize 15
sv_downloadurl ""

sv_minrate 20000
sv_maxrate 30000
decalfrequency 10
sv_maxupdaterate 100
sv_minupdaterate 66
sv_mincmdrate 66
sv_maxcmdrate 100

log off
sv_logbans 0
sv_logecho 1
sv_logfile 0
sv_log_onefile 0

sv_lan 0
sv_region -1
sv_contact forcystustf2@gmail.com
sv_pausable 0
sv_pure 1
sv_pure_kick_clients 1

[Nackspärr]

you need to open your ports

[Kilvanys]

(06-27-2011, 04:55 AM)Nackspärr Wrote:  you need to open your ports

Which ports do i need to open? also windows firewall is disabled

[Nackspärr]

Steamclient1: 27000 - 27020
Steamclient2: 27020 - 27050
SteamServ: 27015

[Kilvanys]

(06-27-2011, 05:00 AM)Nackspärr Wrote:  Steamclient1: 27000 - 27020
Steamclient2: 27020 - 27050
SteamServ: 27015

ok, on the router or firewall? TCP or UDP?

[Nackspärr]

on the router, and both, TCP/UDP

[Kilvanys]

(06-27-2011, 05:07 AM)Nackspärr Wrote:  on the router, and both, TCP/UDP

alright will do thank you

[Mooga]

Just do 27000 - 27050.
Doing it the way he had it will cause issues with your router.

[Kilvanys]

(06-27-2011, 03:29 PM)Mooga Wrote:  Just do 27000 - 27050.
Doing it the way he had it will cause issues with your router.

i did that, but people cannot see my server. does this help?

[Cyba_Mephisto]

Who is "people"? Only you? That could be because your router doesn't support nat-loopback or has the wrong settings for it.

[BR5DY]

I believe it's because you put the ports under "Port Triggering" when it needs to be under "Port Range Forward". The ports need to know what IP address to go to (server local IP). Also make sure you're using the latest firmware on your Linksys router. Older firmware isn't always friendly with Steam. http://support.linksys.com is where you need to go to double check.

[bonebreakerZ]

Im have the same problem, i can only connect with lan, don't with the public ip, i have port-forward my router, but people can't connect or fine my server, plz help!

[realchamp]

(11-30-2011, 03:56 AM)bonebreakerZ Wrote:  Im have the same problem, i can only connect with lan, don't with the public ip, i have port-forward my router, but people can't connect or fine my server, plz help!

Being more precise would only make it easier for us to determinate your problem.