SRCDS Steam group


analyzing system
#1
With such a configuration:
Dual Xeon 2.4 GHz Quad Core
8192MB (8GB) RAM
Link 30Mbps

I can run these servers?
  • deathmatch with 52 slots
  • dust2 normal with 60 slots

thanks
Reply
#2
it will be hard to get so high slot counts running smooth. what kind of CPU is that exactly (Xeons have many generations, very different in speed)? many cores do not help you, for two servers you need only two (srcds cannot use more than one core) or maybe three to make sure the system doesn't take away resources. but they must be fast because of your high slot count. so you should use the newest generation. also your link might be a little small, but I am not sure.
you will probably need some tuning in any case, i.e. kernel tuning and config tuning (maybe reducing the tickrate).
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply
#3
(07-24-2010, 05:43 PM)BehaartesEtwas Wrote:  it will be hard to get so high slot counts running smooth. what kind of CPU is that exactly (Xeons have many generations, very different in speed)? many cores do not help you, for two servers you need only two (srcds cannot use more than one core) or maybe three to make sure the system doesn't take away resources. but they must be fast because of your high slot count. so you should use the newest generation. also your link might be a little small, but I am not sure.
you will probably need some tuning in any case, i.e. kernel tuning and config tuning (maybe reducing the tickrate).

Intel® Xeon® Processor E5530
how many slots I get? using the patch and debian 64bits

8gb of ram is good?

* CS:S
Reply
#4
nobody can tell you, just try it out. it's not impossible to achieve that slot counts, with the proper optimization and maybe some draw backs in the quality (e.g. tickrate 33 etc.)
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply
#5
Sorry, is that I will rent a dedicated and am doing some research before purchasing.
thank you.
Reply
#6
in that case, go for highest possible speed per core. pay attention, clock speed does not mean real speed... the cpu generation plays a big role.
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply
#7
Also the used kernel CAN have a huge impact on usage. If you set it up with preemtion high Hz etc. you will need more cpu per slot.
Lock at my signature there you will find precompiled kernels for debian. Try out the zen3-100hz. It seams to reduce usage per slot pretty well. If you want/noeed to build your own kernel, go with the zen3 patch set the zen tuning profile to server. Also you want to use following: preemtion off, dyn tics on, high res timer on and kernel Hz set to 100.
Interactive web based config creator for CS, CSS, TF2 and DODS
Creates server and client configs in an explained dialog.

You`ll also find precompiled debian gameserver kernels for download
Reply
#8
zen3-100hz + debian 64bit = great results from ob:css

@Terrorkarotte, Thank you for compiling the kernel
Reply
#9
If you're looking to host slot counts that high, but only two game servers I would say that you would need a nice dual core with a frequency of at least 3.2GHz ( NO AMD Athlons )
Looking for a game server? Visit fullfrag.com and pick one up as low as $2.50 / mo!
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)