vac secure servers

[eriknagel]

hello i have 6 servers on my server computer but only 2 of them gets vac secured i have tryed -secure in launch options tryded to start 1 and 1 server but same result no vac i have port 27015 27016 27017 27018 27019 27022 and source tv on 27021 but i dont get vac secured http://eriknagel.mine.nu is my servers on plis help me



thanks

[Mooga]

Change the ports. Do 5 or 6 ports between servers: 27015, 27021, 27028, and such.

[lol554]

use the -sport parameter to set the VAC-port

[Nisd]

I normaly place the servers with 10 ports diffrences, looks nice and works
27015 - 27025 - 27035 and so on.

[lol554]

(02-08-2010, 07:44 PM)Nisd Wrote:  I normaly place the servers with 10 ports diffrences, looks nice and works
27015 - 27025 - 27035 and so on.

Im not sure if you would still be required to use the -sport parameter. VAC normally sets it default port 27015, so it would maybe still be required to change this. But still, i aint sure

[eriknagel]

what is -sport for somthing what shuld i write after -sport?

[Mooga]

it's -port POSTNUMBER
so like:
-port 27015
-port 27025

That's in the bootup line

Can your post the commands you use to start the servers?

[eriknagel]

(02-09-2010, 12:29 PM)Mooga Wrote:  it's -port POSTNUMBER
so like:
-port 27015
-port 27025

That's in the bootup line

Can your post the commands you use to start the servers?

WAR server: -console -game cstrike +ip 192.168.1.24 +port 27015 +maxplayers 13 +map de_dust2 -tickrate 100 -verify_all +tv_port 27021 -secure +sv_lan 0

jail server: -console -game cstrike +map ba_jail_dust_ghost +maxplayers 20 -autoupdate -tickrate 100 -port 27016 +tv_port 27022 -secure -verify_all

BH server: -console -game cstrike -port 27017 +maxplayers 20 +map bhop_eazy +log_on -tickrate 100 -verify_all +tv_port 27023 -secure +sv_lan 0

AIM server: -console +title "Mg server" -game cstrike +ip 192.168.1.24 +port 27018 +maxplayers 20 +map aim_ak-colt -tickrate 100 -verify_all +tv_port 27024 -secure +sv_lan 0

Fotball : -console -game cstrike +ip 192.168.1.24 -port 27019 +maxplayers 20 +map ka_soccer_2006_v3fix2 -tickrate 100 -verify_all +tv_port 27025 -secure +sv_lan 0


but when i add multiplise ip addresses to my computer then the router whont enable more portes att difrent ip addreses i have a linksys WRT54G router

[lol554]

(02-09-2010, 12:29 PM)Mooga Wrote:  it's -port POSTNUMBER
so like:
-port 27015
-port 27025

That's in the bootup line

Can your post the commands you use to start the servers?

-sport is the port which VAC listens on. Set your desired port after the -sport parameter ex. -sport 27055

[eriknagel]

(02-09-2010, 06:07 PM)lol554 Wrote:  

(02-09-2010, 12:29 PM)Mooga Wrote:  it's -port POSTNUMBER
so like:
-port 27015
-port 27025

That's in the bootup line

Can your post the commands you use to start the servers?

-sport is the port which VAC listens on. Set your desired port after the -sport parameter ex. -sport 27055

tryed whit -sport but dont change anything
have tryed multiplies ip addresses but when i try to port forward same port 27015 on 2 ip addresses it says i cant do it i have a WRT54G linksys router v.5 Firmware: DD-WRT v24-sp2 (07/22/09) micro
Time: 18:00:12 up 1:45, load average: 4.06, 2.20, 1.02

[lol554]

Well it makes a lot of sense if it tells you that you can't forward 2 of the same ports (on same protocol), as this is completely impossible.

[skeletor]

Okay, so this isn't at all useful to resolve this, but how do you plan on hosting all of those on a home internet connection? To extend on that, adding them all on different LAN IP's wouldn't matter anyways as they are still communicating under the same external IP. Unless you are wanting to host just LAN servers that are VAC secured at which point you should be able to put them on different IP's and you generally don't have to forward ports for VAC secure.

[RaMMz]

As far as I know, -sport is only for hlds, not for srcds...

Try with -ip 0.0.0.0, it will activate the VAC but wont show up on the masterlist

[Beaverbeliever]

(02-12-2010, 06:39 AM)RaMMz Wrote:  As far as I know, -sport is only for hlds, not for srcds...

Try with -ip 0.0.0.0, it will activate the VAC but wont show up on the masterlist

Setting -ip to 0.0.0.0 is a moronic thing to do. It screws up your server pretty bad.

[3choE]

eriknagel,

So those servers in question, you can start them OK, and you can join them OK, but they are not being listed?

This seems very likely a firewall issue to me.

1)
Are you using any software firewall?

2)
All 6 servers are CS:S?

---

While you have forward the ports in your router, a particular instance of srcds.exe might be blocked by the firewall.