Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
09-04-2009, 11:17 PM
Hello when i made my other thread it was all about the hldsupdatetool and the admin helped me but when i run the sever now it just says: "Couldn't allocate dedicated server udp prot" and when i downloaded srcds i maked a shortcut to srcds.exe and named it RUN SRCDS and in propeties i have this settings "C:\SRCDS\srcds.exe -console -game cstrike -tickrate 33 -ip 84.216.49.210 -port 27015 -maxplayers 10 +map de_dust2" in the -ip should i use the ip i can find in http://www.whatsmyip.com or should i use the 192.168.1.XX And when i open cmd and type "ipconfig/all" it just says " ip config/all is not an commando" or something like that what the problem ??
and if someone can go to portforward.com and choose this router "Dlink" and then you choose "DSL 2640v2" and choose the game and tell me what ports to open ? thank you 
Posts: 7,778
Threads: 176
Joined: May 2008
Reputation:
83
Remove the IP from the start up line.
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
realchamp Wrote:Remove the IP from the start up line.
but how do i make it public ?
Posts: 7,778
Threads: 176
Joined: May 2008
Reputation:
83
Lolarne Wrote:realchamp Wrote:Remove the IP from the start up line.
but how do i make it public ?
Open your ports to your LOCAL IP of the computer running the servers.
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
realchamp Wrote:Lolarne Wrote:realchamp Wrote:Remove the IP from the start up line.
but how do i make it public ?
Open your ports to your LOCAL IP of the computer running the servers.
local ip is that 192.168.1.XX or the ip i found on http://www.whatsmyip.com ? and when i go to portforward and then i choose my router name and then i need to select a game and im running a cs:s server so what game should i take i cant find counter strike source but i can find counter strike 1.6 so should i take that game ?
Posts: 7,778
Threads: 176
Joined: May 2008
Reputation:
83
Lolarne Wrote:realchamp Wrote:Lolarne Wrote:realchamp Wrote:Remove the IP from the start up line.
but how do i make it public ?
Open your ports to your LOCAL IP of the computer running the servers.
local ip is that 192.168.1.XX or the ip i found on http://www.whatsmyip.com ? and when i go to portforward and then i choose my router name and then i need to select a game and im running a cs:s server so what game should i take i cant find counter strike source but i can find counter strike 1.6 so should i take that game ?
Local IP is that 192.168.1.xx one.
Yes just take Counter Strike 1,6
Posts: 55
Threads: 4
Joined: Mar 2009
Reputation:
1
To make your server accessible to the public all you should have to do is forward the correct ports on your router to your servers INTERNAL IP address (which is your 192.168.x.x address).
Afterwords in your start up line (C:\SRCDS\srcds.exe -console -game cstrike -tickrate 33 -ip 84.216.49.210 -port 27015 -maxplayers 10 +map de_dust2) change "-ip 84.216.49.210" to your internal IP address ( -ip 192.168.x.x)
For friends to connect to your server they will need your external IP address and the server port number (84.216.48.210:27015). If everything is set up correctly, when they go to connect, they should hit your External IP > Your Router > Which then forwards all traffic on port 27015 to the internal IP (192.168.x.x) of your server.
-O.K.
Posts: 55
Threads: 4
Joined: Mar 2009
Reputation:
1
If you think you have forwarded everything correctly and it still isn't working, you might need to make sure that your Router's firewall is blocking or filtering WAN requests. I notice that these are enabled because when I tried to ping your IP address (assuming that is your real IP address) I got no response.
-O.K.
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
Ok can you check this on portforward for me please ^^ im such a noobish at this
can you choose dlink DSL 2640bv2 nad choose the game and tell me what ports to open and i think i will make it ^^ btw i have a new ip adress now idk how but here it is .. 84.216.50.85 and here is my server.cfg folder if its that, that make it not to work ..
//------------------------------//**Main Server Config**\\--------------------------------\\
hostname "Cr33py Or Cut3 | 33 tickrate | 24/7 de_dust2 |" //Hostname for server.
sv_password //Server password for entry into multiplayer games
//ip 84.216.50.85 //Overrides IP for multihomed hosts (just backup, not needed)
//hostport 27015 //Host game server port (just backup, not needed)
sv_lan 0 //Server is a lan server ( no heartbeat, no authentication, no non-class C addresses, 9999.0 rate, etc. )
motdfile motd.txt //The MOTD file to load
mapcyclefile mapcycle.txt //File to load mapcycle from
//sv_downloadurl "http://mysite.com/cstrike" //Location from which clients can download missing files (don't use if you don't have webspace)
fps_max 500 //Frame rate limiter (FPS is important on the server, this sets the limit higher)
//------------------------------------//**RCon**\\----------------------------------------\\
rcon_password lolarne //remote console password
sv_rcon_banpenalty 0 //Number of minutes to ban users who fail rcon authentication
sv_rcon_maxfailures 20 //Max number of times a user can fail rcon authentication before being banned
sv_rcon_minfailures 20 //Number of times a user can fail rcon authentication in sv_rcon_minfailuretime before being banned
sv_rcon_minfailuretime 20 //Number of seconds to track failed rcon authentications
//----------------------------------------------------------------------------------------\\
//------------------------------//**Main Game Settings**\\--------------------------------\\
mp_restartgame 0 //If non-zero, game will restart in the specified number of seconds
mp_roundtime 3 //How many minutes each round takes.
mp_autokick 0 //Kick idle/team-killing players
mp_timelimit 30 //game time per map in minutes
mp_winlimit 25 //max number of rounds one team can win before server changes maps
mp_maxrounds 0 //max number of rounds to play before server changes maps
mp_fraglimit 0 //max number of kills to get before server changes maps
mp_allowspectators 0 //toggles whether the server allows spectator mode or not
mp_buytime 3 //How many minutes after round start players can buy items for.
mp_freezetime 4 //how many seconds to keep players frozen when the round starts
decalfrequency 20 //Amount of time in seconds a player can spray their decal
mp_friendlyfire 0 //Allow friendly fire
mp_falldamage 1 //Will players be damaged when they fall a certain distance
mp_footsteps 1 //Makes clients hear footsteps of eachother
mp_flashlight 1 //Allow the flashlight to be used
mp_forcecamera 0 //Restricts spectator modes for dead players
mp_fadetoblack 0 //fade a player's screen to black when he dies
mp_chattime 15 //amount of time players can chat after the game is over
mp_startmoney 1000 //amount of money each player gets when they join the game
mp_c4timer 40 //how long from when the C4 is armed until it blows
mp_tkpunish 0 //Will a TK'er be punished in the next round? {0=no, 1=yes}
mp_hostagepenalty 0 //Terrorist are kicked for killing too much hostages
mp_spawnprotectiontime 5 //Kick players who team-kill within this many seconds of a round restart.
mp_playerid 0 //Controls what information player see in the status bar: 0 all names, 1 team names, 2 no names
//----------------------------------------------------------------------------------------\\
//---------------------------------//**Team Settings**\\----------------------------------\\
mp_autoteambalance 1 //Server automatically changes players to even teams
//mp_defaultteam 0 //What is the default team to join?
//mp_humanteam T //Restricts human players to a single team {any, CT, T}
mp_limitteams 2 //Max # of players 1 team can have over another (0 disables check)
mp_teamoverride 1 //Allow server to regulate teams
//----------------------------------------------------------------------------------------\\
//-----------------------------------//**System**\\---------------------------------------\\
sv_contact me@myemail.com //Contact email for server sysop
sv_region 255 //The region of the world to report this server in.0=US East coast, 1=US West coast, 2= South America, 3=Europe, 4=Asia, 5=Australia, 6=Middle East, 7=Africa and 255=world.
sv_cheats 0 //Allow cheats on server
sv_pausable 0 //Is the server pausable.
sv_filterban 0 //Set packet filtering by IP mode
sv_forcepreload 0 //Force server side preloading.
sv_allowdownload 1 //Allow clients to download files
sv_allowupload 1 //Allow clients to upload customizations files
sv_maxrate 10000 //Max bandwidth rate allowed on server, 0 == unlimited
sv_minrate 10000 //Min bandwidth rate allowed on server, 0 == unlimited
sv_maxupdaterate 100 //Maximum updates per second that the server will allow (don't change this)
sv_minupdaterate 20 //Minimum updates per second that the server will allow (don't change this)
sv_unlag 1 //Enables player lag compensation
sv_maxunlag 1 //Maximum lag compensation in seconds
sv_unlag_debug 0 //Debugs lag compensation
sv_alltalk 0 //Players can hear all other players, no team restrictions
sv_footsteps 1 //Play footstep sound for players
sv_voiceenable 0 //Enables voice talking ingame
sv_voicecodec vaudio_miles //Specifies which voice codec DLL to use in a game. Set to the name of the DLL without the extension.
sv_timeout 60 //After this many seconds without a message from a client, the client is dropped
//----------------------------------------------------------------------------------------\\
//------------------------------------//**Bot**\\-----------------------------------------\\
//bot_chatter minimal
//bot_defer_to_human 1
//bot_difficulty 1 // 1- Easy 2- hard 3- Impossible
//bot_join_after_player 0
//bot_prefix "-[Im-A-Bot]- " // Bots get this infront of their name (-[Im-A-Bot]- Shawn)
//bot_quota 20 // Maximum amount of bots that join the game
//bot_quota_mode normal
//bot_auto_vacate 0 // Bots automatically leave the server to make room for players
//bot_auto_follow 1 // Bots follow human players
//bot_allow_rogues 0 // Allow bots to go their own way
//bot_eco_limit 3000 // Bots won't buy anything when cash is below this amount
//bot_all_weapons
//bot_allow_grenades 1
//bot_allow_machine_guns 1
//bot_allow_pistols 1
//bot_allow_rifles 1
//bot_allow_shotguns 1
//bot_allow_snipers 0
//bot_allow_sub_machine_guns 1
//bot_join_team CT
//----------------------------------------------------------------------------------------\\
//----------------------------------//**Logging**\\---------------------------------------\\
log on //Creates a logfile (Enable= on Disable= off)
sv_logfile 1 //Log server information in the log file.
sv_logsdir F:\SRCDS\cstrike\logs //Folder in the game directory where server logs will be stored.
sv_logecho 0 //Echo log information to the console.
sv_log_onefile 1 //Log server information to only one file.
sv_logbans 1 //Log server bans in the server logs.
sv_logdownloadlist 1 //Log files to download.
sv_deltaprint 0 //Print accumulated CalcDelta profiling data (only if sv_deltatime is on)
//----------------------------------------------------------------------------------------\\¨
//----------------------------------//**ManiLoad**\----------------------------- ---------\
exec mani_server.cfg
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
09-05-2009, 01:57 AM
(This post was last modified: 09-05-2009, 02:25 AM by Lolarne.)
i think i found the problem ! ? when i open the RUN SRCDS shortvut it says there Network: Ip 192.168.1.2, mode MP, dedicated Yes, prots 27015 SV / 27005 CL
but when i type in connect 84.216.50.85:27015 in console in css its just says
connect 84.216.50.85:27015
Socket bound to non-default port 27016 because original port was already in use.
Socket bound to non-default port 27021 because original port was already in use.
Socket bound to non-default port 27006 because original port was already in use.
Network: IP 192.168.1.2, mode MP, dedicated No, ports 27016 SV / 27006 CL
Connecting to 84.216.50.85:27015...
Retrying 84.216.50.85:27015...
] connect 84.216.50.85:27015
Connecting to 84.216.50.85:27015...
Retrying 84.216.50.85:27015...
Posts: 7,778
Threads: 176
Joined: May 2008
Reputation:
83
Lolarne Wrote:i think i found the problem ! ? when i open the RUN SRCDS shortvut it says there Network: Ip 192.168.1.2, mode MP, dedicated Yes, prots 27015 SV / 27005 CL
but when i type in connect 84.216.50.85:27015 in console in css its just says
connect 84.216.50.85:27015
Socket bound to non-default port 27016 because original port was already in use.
Socket bound to non-default port 27021 because original port was already in use.
Socket bound to non-default port 27006 because original port was already in use.
Network: IP 192.168.1.2, mode MP, dedicated No, ports 27016 SV / 27006 CL
Connecting to 84.216.50.85:27015...
Retrying 84.216.50.85:27015...
] connect 84.216.50.85:27015
Connecting to 84.216.50.85:27015...
Retrying 84.216.50.85:27015...
You can't connect to your own external IP!
You must connect with the internal IP!
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
realchamp Wrote:Lolarne Wrote:i think i found the problem ! ? when i open the RUN SRCDS shortvut it says there Network: Ip 192.168.1.2, mode MP, dedicated Yes, prots 27015 SV / 27005 CL
but when i type in connect 84.216.50.85:27015 in console in css its just says
connect 84.216.50.85:27015
Socket bound to non-default port 27016 because original port was already in use.
Socket bound to non-default port 27021 because original port was already in use.
Socket bound to non-default port 27006 because original port was already in use.
Network: IP 192.168.1.2, mode MP, dedicated No, ports 27016 SV / 27006 CL
Connecting to 84.216.50.85:27015...
Retrying 84.216.50.85:27015...
] connect 84.216.50.85:27015
Connecting to 84.216.50.85:27015...
Retrying 84.216.50.85:27015...
You can't connect to your own external IP!
You must connect with the internal IP!
ok
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
09-05-2009, 04:50 AM
(This post was last modified: 09-05-2009, 04:51 AM by Lolarne.)
now im getting this in my console FCMOV
execing valve.rc
Socket bound to non-default port 27016 because original port was already in use.
Socket bound to non-default port 27021 because original port was already in use.
Socket bound to non-default port 27006 because original port was already in use.
Network: IP 192.168.1.2, mode MP, dedicated No, ports 27016 SV / 27006 CL
Connecting to 192.168.1.2:27015...
Connected to 192.168.1.2:27015
Counter-Strike: Source
Map: de_dust2
Players: 1 / 10
Build 3945
Server Number 1
SetConVar: No such cvar ( es_corelib_ver set to 1.5.0.171b), skipping
SetConVar: No such cvar ( mani_tickrate set to 33), skipping
SetConVar: No such cvar ( mani_nextmap set to de_piranesi), skipping
No pure server whitelist. sv_pure = 0
CAsyncWavDataCache: 2 .wavs total 0 bytes, 0.00 % of capacity
Begin loading faces (loads materials)
End loading faces (loads materials)
Initializing renderer...
Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : de_dust/groundsand_blend
- Surface center : -1920 2440 0
Warning: using WorldTwoTextureBlend on a non-displacement surface (material: de_dust/groundsand_blend). Support for this will go away soon.
And my friends can still not join they say it says server not responsing
Posts: 7,778
Threads: 176
Joined: May 2008
Reputation:
83
Lolarne Wrote:now im getting this in my console FCMOV
execing valve.rc
Socket bound to non-default port 27016 because original port was already in use.
Socket bound to non-default port 27021 because original port was already in use.
Socket bound to non-default port 27006 because original port was already in use.
Network: IP 192.168.1.2, mode MP, dedicated No, ports 27016 SV / 27006 CL
Connecting to 192.168.1.2:27015...
Connected to 192.168.1.2:27015
Counter-Strike: Source
Map: de_dust2
Players: 1 / 10
Build 3945
Server Number 1
SetConVar: No such cvar ( es_corelib_ver set to 1.5.0.171b), skipping
SetConVar: No such cvar ( mani_tickrate set to 33), skipping
SetConVar: No such cvar ( mani_nextmap set to de_piranesi), skipping
No pure server whitelist. sv_pure = 0
CAsyncWavDataCache: 2 .wavs total 0 bytes, 0.00 % of capacity
Begin loading faces (loads materials)
End loading faces (loads materials)
Initializing renderer...
Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : de_dust/groundsand_blend
- Surface center : -1920 2440 0
Warning: using WorldTwoTextureBlend on a non-displacement surface (material: de_dust/groundsand_blend). Support for this will go away soon.
And my friends can still not join they say it says server not responsing
They must connect with your external IP.
( http://ip.realchamp.dk)
And have you made portforwarding?
Posts: 45
Threads: 5
Joined: Sep 2009
Reputation:
0
09-05-2009, 05:49 AM
(This post was last modified: 09-05-2009, 05:57 AM by Lolarne.)
realchamp Wrote:Lolarne Wrote:now im getting this in my console FCMOV
execing valve.rc
Socket bound to non-default port 27016 because original port was already in use.
Socket bound to non-default port 27021 because original port was already in use.
Socket bound to non-default port 27006 because original port was already in use.
Network: IP 192.168.1.2, mode MP, dedicated No, ports 27016 SV / 27006 CL
Connecting to 192.168.1.2:27015...
Connected to 192.168.1.2:27015
Counter-Strike: Source
Map: de_dust2
Players: 1 / 10
Build 3945
Server Number 1
SetConVar: No such cvar ( es_corelib_ver set to 1.5.0.171b), skipping
SetConVar: No such cvar ( mani_tickrate set to 33), skipping
SetConVar: No such cvar ( mani_nextmap set to de_piranesi), skipping
No pure server whitelist. sv_pure = 0
CAsyncWavDataCache: 2 .wavs total 0 bytes, 0.00 % of capacity
Begin loading faces (loads materials)
End loading faces (loads materials)
Initializing renderer...
Warning: using WorldTwoTextureBlend on a non-displacement surface.
Support for this will go away soon.
- Material : de_dust/groundsand_blend
- Surface center : -1920 2440 0
Warning: using WorldTwoTextureBlend on a non-displacement surface (material: de_dust/groundsand_blend). Support for this will go away soon.
And my friends can still not join they say it says server not responsing
They must connect with your external IP.
(http://ip.realchamp.dk)
And have you made portforwarding?
ÿes do you have teamviewer ?
|
