how see the real fps

[xntz]

the cmd "stats" show a maximum of 1000fps but if you use "host_speeds 1" you will see the real fps.

example with sys_ticrate 10000 & pingboost 3

Code:

6172 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7874 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6896 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7751 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7936 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7936 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6896 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
5813 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7999 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7042 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7999 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7751 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
8064 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6802 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
5494 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
999 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6802 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7874 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7407 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7812 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6896 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6289 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
5988 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7751 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6024 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
999 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7999 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6756 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6410 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
8695 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
6756 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
8064 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)
7874 fps -- host( 0) sv( 0) cl( 0) gfx( 0) snd( 0) ents(123)

of course this amount of fps is unplayable (too fast). it's just for information.

sorry bad english, bye.

[doggy93]

Nice.

[BehaartesEtwas]

very interesting. do you know any method to get this information via rcon? that could be very useful for my fps meter... on the console I can use a command like this to get a single value:

Code:

host_speeds 1; wait;  host_speeds 0

I do not want to tamper with logging, as far as I know that would disable e.g. hlstats, because only one logging target is allowed for hlds...

thanks!

[xntz]

No i don't know, sorry.

[BehaartesEtwas]

is it true, that still only one logging target is allowed for hlds?