fps_max unknown command?

[greatmamut]

66.0 fps 0/14 on map l4d_farm01_hilltop
#Console initialized.
#Game.dll loaded for "L4D - Normal"
Server is hibernating
ConVarRef test_progression_loop doesn't point to an existing ConVar
Game supporting (2) split screen players
maxplayers set to 14
Unknown command "r_decal_cullsize"
Unknown command "fps_max"
Unknown command "mat_bloom_scalefactor_scalar"
NET_GetBindAddresses found 192.168.1.3: 'Realtek RTL8168C(P)/8111C(P) PCI-E Giga
bit Ethernet NIC - Minipuerto del administrador de paquetes'
Network: IP 192.168.1.3, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
---- Host_NewGame ----
Compact released 65536 bytes to the backing store
Host_NewGame on map l4d_farm01_hilltop
Executing dedicated server config file
Commentary: Loading commentary data from maps/l4d_farm01_hilltop_commentary.txt.

Unknown command "sv"
Connection to Steam servers successful.
VAC secure mode disabled.
Adding master server 68.142.72.250:27011
Adding master server 72.165.61.189:27011
Sending heartbeat to master server...

Why show the command fps_max as unknown?

srcds.exe -game left4dead -console -insecure +z_difficulty hard -tickrate 66 +fps_max 400 +maxplayers 15 -port 27015 +exec server.cfg +map l4d_farm01_hilltop.bsp

[St1flus]

I don't think L4D has max fps...

Why would you even use it unless you were making it lower? L4D servers pretty much eat your server up (in terms of cpu usage) like fatmen eat at hotdog contests.

[Mooga]

L4D has a set FPS and Tickrate.

[dualcore1289]

therefor you can not set the fps nor tickrate

[ComputerHelper]

just asking, what is the set fps/tick?

[greatmamut]

I have found the command in the manual of line command full of Left4dead.

The command "+fps_max" isn't working in Left4dead.

Now the new command is "-fps_max" and only is working in line command in SRCDS.BAT, It will not work in SERVER.CFG.

Tested and working OK

Thank you!

[Drocona]

it's 30 tick afaik

[burns-o]

greatmamut Wrote:66.0 fps 0/14 on map l4d_farm01_hilltop
#Console initialized.
#Game.dll loaded for "L4D - Normal"
Server is hibernating
ConVarRef test_progression_loop doesn't point to an existing ConVar
Game supporting (2) split screen players
maxplayers set to 14
Unknown command "r_decal_cullsize"
Unknown command "fps_max"
Unknown command "mat_bloom_scalefactor_scalar"
NET_GetBindAddresses found 192.168.1.3: 'Realtek RTL8168C(P)/8111C(P) PCI-E Giga
bit Ethernet NIC - Minipuerto del administrador de paquetes'
Network: IP 192.168.1.3, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
---- Host_NewGame ----
Compact released 65536 bytes to the backing store
Host_NewGame on map l4d_farm01_hilltop
Executing dedicated server config file
Commentary: Loading commentary data from maps/l4d_farm01_hilltop_commentary.txt.

Unknown command "sv"
Connection to Steam servers successful.
VAC secure mode disabled.
Adding master server 68.142.72.250:27011
Adding master server 72.165.61.189:27011
Sending heartbeat to master server...

Why show the command fps_max as unknown?

srcds.exe -game left4dead -console -insecure +z_difficulty hard -tickrate 66 +fps_max 400 +maxplayers 15 -port 27015 +exec server.cfg +map l4d_farm01_hilltop.bsp

I get the same problem with my hl2dm server. Everything else loads fine but that.

[greatmamut]

burns-o Wrote:

greatmamut Wrote:66.0 fps 0/14 on map l4d_farm01_hilltop
#Console initialized.
#Game.dll loaded for "L4D - Normal"
Server is hibernating
ConVarRef test_progression_loop doesn't point to an existing ConVar
Game supporting (2) split screen players
maxplayers set to 14
Unknown command "r_decal_cullsize"
Unknown command "fps_max"
Unknown command "mat_bloom_scalefactor_scalar"
NET_GetBindAddresses found 192.168.1.3: 'Realtek RTL8168C(P)/8111C(P) PCI-E Giga
bit Ethernet NIC - Minipuerto del administrador de paquetes'
Network: IP 192.168.1.3, mode MP, dedicated Yes, ports 27015 SV / 27005 CL
---- Host_NewGame ----
Compact released 65536 bytes to the backing store
Host_NewGame on map l4d_farm01_hilltop
Executing dedicated server config file
Commentary: Loading commentary data from maps/l4d_farm01_hilltop_commentary.txt.

Unknown command "sv"
Connection to Steam servers successful.
VAC secure mode disabled.
Adding master server 68.142.72.250:27011
Adding master server 72.165.61.189:27011
Sending heartbeat to master server...

Why show the command fps_max as unknown?

srcds.exe -game left4dead -console -insecure +z_difficulty hard -tickrate 66 +fps_max 400 +maxplayers 15 -port 27015 +exec server.cfg +map l4d_farm01_hilltop.bsp

I get the same problem with my hl2dm server. Everything else loads fine but that.

Have you tried with "-fps_max" in line command in the file SRCDS.BAT?
It is working OK in Left 4 Dead!!!

Greetings!