12-28-2007, 01:00 PM
I just purchased a dual xeon (4 cores) 2 gb ram dedicated windows server
I installed the TCAdmin game panel to help me administer my servers easily, and Installed 3 servers, 1 per core, 32 man 100 tick, 24 man 100 tick, 12 slot private
I notice severe tickrate drops, and i even tried using "high cpu priority" on my box and that did not help much either.
The tick drops 20-30, and then the choke increases significantly.
What I want to know is what are some really good commands that I can run in my server.cfg that will help run my server at optimum quality?
Also, what is the maximum value that fps_max can be on a windows server (i have srcdsfpsboost running)
Thanks a lot for your help, and here is my current cfg
hostname "Lewler.com Pub|100Tic|500 FPS|HLStatsX|ZBlock"
rcon_password "xxxxx"
exec banned.cfg
exec listip.cfg
mp_logdetail 0
mp_logmessages 0
mp_autokick 1
mp_autoteambalance 1
mp_c4timer 45
mp_flashlight 0
mp_footsteps 1
mp_forcechasecam 0
mp_freezetime 3
heartbeat
mp_buytime .3334
sv_maxunlag .5
mp_friendlyfire 1
mp_hostagepenalty 0
mp_limitteams 1
mp_roundtime 2
mp_tkpunish 0
sv_restartround 1
sv_maxspeed 320
sv_proxies 1
allow_spectators 90
mp_startmoney 800
mp_chattime 5
sv_allowupload 1
sv_allowdownload 1
sv_voiceenable 1
sv_alltalk 1
sv_voicequality 5
sv_voicecodec vaudio_speex
pausable 0
decalfrequency 40
mp_falldamage 0
sv_aim 0
sv_cheats 0
sv_lan 0
sv_contact
sv_downloadurl "http://247vent.ownagepranks.com/cstrike/"
sv_region 0
sv_downloads 1
mp_winlimit 0
sv_pure 0
mp_flashlight 1
sv_turbophysics 2
mp_timelimit 0
phys_pushscale 4
exec mani_server.cfg
exec mani_quake_sounds.cfg
mp_timelimit 25
// bandwidth rates/settings
sv_minrate 5000
sv_maxrate 25000
sv_minupdaterate 66
sv_maxupdaterate 101
sv_mincmdrate 20
sv_maxcmdrate 101
//sv_client_cmdrate_difference 1
//sv_client_predict 1
//sv_client_interpolate 1
//sv_client_min_interp_ratio -1
//sv_client_max_interp_ratio -1
(I disabled those commands on the bottom recently bc I thought they may be the cause of some of the lag, are they?)
Thank you so much guys, I don't plan on overloading this box, 4 to 5 servers max. I was hoping that they would run flawlessly..
I installed the TCAdmin game panel to help me administer my servers easily, and Installed 3 servers, 1 per core, 32 man 100 tick, 24 man 100 tick, 12 slot private
I notice severe tickrate drops, and i even tried using "high cpu priority" on my box and that did not help much either.
The tick drops 20-30, and then the choke increases significantly.
What I want to know is what are some really good commands that I can run in my server.cfg that will help run my server at optimum quality?
Also, what is the maximum value that fps_max can be on a windows server (i have srcdsfpsboost running)
Thanks a lot for your help, and here is my current cfg
hostname "Lewler.com Pub|100Tic|500 FPS|HLStatsX|ZBlock"
rcon_password "xxxxx"
exec banned.cfg
exec listip.cfg
mp_logdetail 0
mp_logmessages 0
mp_autokick 1
mp_autoteambalance 1
mp_c4timer 45
mp_flashlight 0
mp_footsteps 1
mp_forcechasecam 0
mp_freezetime 3
heartbeat
mp_buytime .3334
sv_maxunlag .5
mp_friendlyfire 1
mp_hostagepenalty 0
mp_limitteams 1
mp_roundtime 2
mp_tkpunish 0
sv_restartround 1
sv_maxspeed 320
sv_proxies 1
allow_spectators 90
mp_startmoney 800
mp_chattime 5
sv_allowupload 1
sv_allowdownload 1
sv_voiceenable 1
sv_alltalk 1
sv_voicequality 5
sv_voicecodec vaudio_speex
pausable 0
decalfrequency 40
mp_falldamage 0
sv_aim 0
sv_cheats 0
sv_lan 0
sv_contact
sv_downloadurl "http://247vent.ownagepranks.com/cstrike/"
sv_region 0
sv_downloads 1
mp_winlimit 0
sv_pure 0
mp_flashlight 1
sv_turbophysics 2
mp_timelimit 0
phys_pushscale 4
exec mani_server.cfg
exec mani_quake_sounds.cfg
mp_timelimit 25
// bandwidth rates/settings
sv_minrate 5000
sv_maxrate 25000
sv_minupdaterate 66
sv_maxupdaterate 101
sv_mincmdrate 20
sv_maxcmdrate 101
//sv_client_cmdrate_difference 1
//sv_client_predict 1
//sv_client_interpolate 1
//sv_client_min_interp_ratio -1
//sv_client_max_interp_ratio -1
(I disabled those commands on the bottom recently bc I thought they may be the cause of some of the lag, are they?)
Thank you so much guys, I don't plan on overloading this box, 4 to 5 servers max. I was hoping that they would run flawlessly..