SRCDS Steam group


Ok another rates question :D
#1
Ok these are my specs..

3000 kbps Upload..
Athlon 64+ 4800 x2 2.4 Ghz
2 Gb RAM
200 GB 70,000 RPM

sooo..im runnin a 12 man 100 tick..scoutzknivez..i really need the 100 tick for air strafing..

from what i hear my upload is more then enuff to handle a 12 man 100 tick...so why do i get ppl complainin bout lag and shots not registering...

these are my rates..

sv_minrate 30000
sv_maxrate 30000
decalfrequency 10
sv_maxupdaterate 100
sv_minupdaterate 66
sv_unlag 1

is there ANY thing else i can do to improove the server..or have i done all i can?
also i am runnin WMP for the fps boost..ive tried the fpsbooster and WMP to see if either one runs better but..the server runs the same with either one..

so ANY tips ANYthing at all ..that i can do to boost the server performance.. also ive added heapsize to cmd line..and set prioritty to high for srcds.exe on task manager.

i do not use router.
[Image: 461031727.png]

Reply
#2
i would lower the minrate to something like 12500 or 7500, if your users can get 30000 (though i believe 25000 is max) they will request it but forcing them to use only 30000 can lead to loss/choke. see if that helps also try leaving the priority on normal, if srcds.exe is the only thing significant that you run, then you don't need to set it to high.
Reply
#3
Make sure the server FPS is higher than 100,
as fqdn said lower the minrate (btw: 30000 is the max, I don't know why all servers use 25k.)

You might want to check ingame yourself and see what kind of lag there is. (look at netgraph_3)
Join the Source Dedicated Server Support Group on Steam Community!
Source Dedicated Server (SRCDS)
Free to join, Live support! (When available)

http://forums.srcds.com/viewtopic/5114
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)