SRCDS Steam group


port's on Router
#1
hey guy's well i just got my server up but
im haveing a problem opening up my port's so my server is on the master list.... ive had many routers before but this one is very veryyy tricky for me.......................... Sad its a
"DSL-604+ wireless high speed gateway" i would take some screen shot's to show you guys but i forget how to do that lol so plz help thnxs
Reply
#2
I have the exact same router (you don't come along these very often apparently Wink).

Login
=> Configuration
=> Port Redirection
Code:
Select index to set      [b]Not selected[/b]
State                    [b]enabled[/b]
Protocol                 [b][depends on the port][/b]
Internet                 [b]Well-known port[/b]
Start Port               [b][port number][/b] OR [b][begin of port range][/b]
End Port                 [b][port number][/b] OR [b][end of port range][/b]
Local IP Address         [b][your server's LAN IP][/b]
You have to configure this for each port/range that you add.
The index will be added automatically (only use it for modifying an entry).
The state determines wether the port is forwarded (enabled) or not (disabled).
The protocol is either TCP or UDP, you'll need to use both for ports forwarded to your server (if you enable all of them).
Start port and end port should be the same if you are configuring one port, for a range of ports you will need to define the begin and end of the range there.
The local IP address is the IP which your server has assigned on your local network (LAN) so *not* your WAN (internet) IP.

Look here for a list of all the ports you need to forward to have all services enabled (e.g. rcon) over the internet.
May the Source be with you...

Want to know which ports to forward on your router for a Source DS? Click here!
Reply
#3
thnxs for the fast reply but i dont understand this part
Login
=> Configuration
=> Port Redirection


Code:
Select index to set Not selected
State enabled
Protocol [depends on the port]
Internet Well-known port
Start Port [port number] OR [begin of port range]
End Port [port number] OR [end of port range]
Local IP Address [your server's LAN IP]

n i put the port in applications am i rigth?
n when i put those ports you told me to put in it
says "entry duplicated."



this is the applications page or what i can fill out

Status Enabled Disabled
Name
Trigger Port [ ]-[ ]
Trigger Type
Public Port [ ]
Public Type

sorry im a newb at this, usally this isnt this hard
but ill keep looking around n tyring new stuff try getting it to work but thnxs for help if you can help me out more that would be great Big Grin
Reply
#4
shawn Wrote:n i put the port in applications am i rigth?
Applications?

shawn Wrote:n when i put those ports you told me to put in it
says "entry duplicated."
That's because you've already managed to get some ports forwarded.

shawn Wrote:this is the applications page or what i can fill out

Status Enabled Disabled
Name
Trigger Port [ ]-[ ]
Trigger Type
Public Port [ ]
Public Type
This one differs from mine. Status is the same; I don't have a 'Name' field; trigger port is the same as begin & end port; trigger type will be UDP or TCP I guess; public port => you can define public ports which forward things to other ports on your server or something? What are your options there?; Public type => what are your options there? I couldn't guess what it is.

shawn Wrote:sorry im a newb at this, usally this isnt this hard
but ill keep looking around n tyring new stuff try getting it to work but thnxs for help if you can help me out more that would be great Big Grin
You don't have to be sorry for being a newb, not at all. If I am helpful to you than I'm happy Smile.
May the Source be with you...

Want to know which ports to forward on your router for a Source DS? Click here!
Reply
#5
im very lost haha but yeah public port i have to write something in it its just a big box thats why i put [ ]
is there anyway i can send you the page or screen shot's of the page of my router so maybe you can understand what im doing wronge Big Grin or can u help me on msn or something Big Grin sw_shawn@msn.com if u can thnxs.
Reply
#6
or do i only use virtual server. applacation's is an option for adavanced... like where the ports are sorry if im not makeing sence lol grr wish i had my old routers then i could get this done n run my server
Reply
#7
Afaik you don't need to set something for 'Application', it's better to leave that disabled. Btw, you've got mail Wink.
May the Source be with you...

Want to know which ports to forward on your router for a Source DS? Click here!
Reply
#8
sorry i suck anything to do with email's but when i press prtscn-sysrq-insert ( on keyboard top rigth )
thats the button to take a screen shot am i rigth ???
n where dose it go to.....
Reply
#9
btw do i just mess around with Viturle server or should i do anything else ????
Reply
#10
Just press [Prt Scr], open Paint and press [Ctrl]+[V] (or choose Edit => Paste) and you can save your screenshot. Some additional info: to take a screenshot of an active window only, make sure you make the right window/program active and press [Alt]+[Prt Scr]. Than save it in Paint the same way as mentioned above.
May the Source be with you...

Want to know which ports to forward on your router for a Source DS? Click here!
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)