Server RCON

[mzracer360]

I switched my server from my main PC to an extra one that I installed a Linux server on. Now I cant RCON into my game server anymore. I have 27000 to 27039 opened, both TCP and UDP, and set to .103, which is what I set my static ip to (this is what I had it set to on my PC, I just changed the ip to the new server pc). People are joining my server, so the ports are working. What could be the problem?

I just tried to RCON through HLSW and I got this error:
HLSW ERROR: Connection failed (No connection could be made because the target machine actively refused it. )

[Hollanda]

You should open up ALL steam ports.

[mzracer360]

what ports am I missing? I thought by doing 27000 to 27039 UPD and TCP I covered them all.

[Hollanda]

http://forums.srcds.com/viewpost/11919#pid11919

[mzracer360]

Those ports are included, expect for Cybercafe. Why would I need that? Steam Friends Server port is open to the pc I play on.

[cryotek]

If you're running firewalls like IPTables, make sure 27015 tcp is allowed as a rule.

[mzracer360]

This iptables setup went way over my head. This is what I got out of it:
iptables -A TRUSTED -i eth0 -p tcp -m tcp --sport 27015 -j ACCEPT
and the whole iptables file:

Code:

# No spoofing
if [ -e /proc/sys/net/ipv4/conf/all/rp_filter ]
then
for filtre in /proc/sys/net/ipv4/conf/*/rp_filter
do
echo 1 > $filtre
done
fi

# No icmp
echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all
echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts

#load some modules you may need
modprobe ip_tables
modprobe ip_nat_ftp
modprobe ip_nat_irc
modprobe iptable_filter
modprobe iptable_nat

# Remove all rules and chains
iptables -F
iptables -X

# first set the default behaviour => accept connections
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT

# Create 2 chains, it allows to write a clean script
iptables -N TRUSTED

# Allow https
iptables -A TRUSTED -i eth0 -p udp -m udp --sport 443 -j ACCEPT
iptables -A TRUSTED -i eth0 -p tcp -m tcp --sport 443 -j ACCEPT

# Allow srcds
iptables -A TRUSTED -i eth0 -p tcp -m tcp --sport 27015 -j ACCEPT

# End message
echo " [End iptables rules setting]"

It still isn't letting me RCON to my server.