SRCDS Steam group


[SOLVED] My friends & I can't join my server
#16
(03-19-2014, 05:44 PM)Garith Wrote:  humor me, remove the -ip and your ip from command line and try that. Also, try putting your public ip in as well.

Removed -ip from command line, all of sudden the IP address is not even close to mine. It says 196.24.189.218:27015. http://i.imgur.com/AD8Ej7N.png

And after putting my public IP for -ip, it gives me the message "Engine Error | Couldn't allocate any server IP port." http://i.imgur.com/geyGQns.png
Reply
#17
Bump.
Reply
#18
Hi there sticktornado!

I wouldn't believe this's an error with the portforwarding.
When you have a Garrys Mod server installed as default. Then you make a "server.cfg" for your server and don't touch anything else. Then you'll have to open 27015 as TCP and UDP for your servers IPv4 address, as you already have done here:
[Image: NET.png]
And it sounds like you are pretty sure about:
Static IP, firewall, ports, IPv4s, program permissions, anti-virus blocking feature and administrative permissions on your computer or server.
If you're just a little bit unsure of any of these I can help else I actually don't know what to do, sorry.
For more help, just hit me:
Steam: bilbodog
Skype: bilbodog2
Facebook: http://www.facebook.com/bilbodog2

And don't forget to +rep [Image: NET-5.png]
- Best Regards bilbodog (Casper Thomsen)
Reply
#19
Well, my attention was caught quickly when I noticed in "Change adapter settings" that I had a huge amount of ethernet devices that I didn't use, so I disabled them. Then I removed the -ip 192.168.0.50 from my server's commandlines and it bound to the IP 192.168.0.50 anyway.

I go into my Garry's Mod, Find Multiplayer Game and I see my server as well as do my friends. We click play, and are disconnected with the message "Server uses different class tables."

I searched for the error message and found Steam Support saying that it would be resolved by the server owner as an update downloaded by the client was not on the server yet. So I ran SteamCMD, logged in anonymously, forced my installation directory correctly, used the command "app_update 4020 validate", it installed correctly, and no luck. Same message still. I have no idea what to do now, at least it's not telling us that it can't be connected to.
Reply
#20
(04-15-2014, 08:28 AM)c Wrote:  Well, my attention was caught quickly when I noticed in "Change adapter settings" that I had a huge amount of ethernet devices that I didn't use, so I disabled them. Then I removed the -ip 192.168.0.50 from my server's commandlines and it bound to the IP 192.168.0.50 anyway.

I go into my Garry's Mod, Find Multiplayer Game and I see my server as well as do my friends. We click play, and are disconnected with the message "Server uses different class tables."

I searched for the error message and found Steam Support saying that it would be resolved by the server owner as an update downloaded by the client was not on the server yet. So I ran SteamCMD, logged in anonymously, forced my installation directory correctly, used the command "app_update 4020 validate", it installed correctly, and no luck. Same message still. I have no idea what to do now, at least it's not telling us that it can't be connected to.

Hi again, sticktornado!

It sounds like your server are pretty messed up. Maybe you should just re-install your Garry's Mod server and try the whole thing again. Smile
For more help, just hit me:
Steam: bilbodog
Skype: bilbodog2
Facebook: http://www.facebook.com/bilbodog2

And don't forget to +rep [Image: NET-5.png]
- Best Regards bilbodog (Casper Thomsen)
Reply
#21
Alright, I will back up my other servers, format the drive not quickly, and do a complete reinstall.
Reply
#22
I've formatted the drive backing up my other servers, did a completely fresh install using SteamCMD, and it works just fine. My "Local Network" area on Garry's Mod still shows it having a ping of 2,000, but people immediately connected. It worked! Gonna get my addons on now to see if that causes it to fail.
Reply
#23
(04-17-2014, 09:44 AM)sticktornado Wrote:  I've formatted the drive backing up my other servers, did a completely fresh install using SteamCMD, and it works just fine. My "Local Network" area on Garry's Mod still shows it having a ping of 2,000, but people immediately connected. It worked! Gonna get my addons on now to see if that causes it to fail.

Sounds good for now. The ping can also be something with your internet connection. But I'll follow and we will take down all the issues step by step.
For more help, just hit me:
Steam: bilbodog
Skype: bilbodog2
Facebook: http://www.facebook.com/bilbodog2

And don't forget to +rep [Image: NET-5.png]
- Best Regards bilbodog (Casper Thomsen)
Reply
#24
The connection's working fine, it seems to be all good! The addons didn't break anything.

However, I am having trouble mounting content to the server now. I'll make a new thread about that, though. Problem is solved!
Reply
#25
How did you end up getting it to work? I am experiencing that same problem but with one of my friends is not able to join.
Reply
#26
Generally, I never remark on online journals however your article is persuading to such an extent that I never stop myself to say something regarding it. You're working really hard Man, Keep it up. Regards Mizzmarketing.com
Reply


Forum Jump:


Users browsing this thread: 5 Guest(s)