No one can connect to my server.

[john23]

I am the only one who can connect to my counter-strike: source server although my server shows up in the server list under the "internet" tab and the server claims to be connected to steam.

My network: Modem>Server>Switch>Computers

My server is running Windows Server 2008 R2 x64 Enterprise on a core i7-860 at 2.80ghz with 4gb of ram.

Startup command: C:\SRCDS\orangebox\srcds.exe -console -game cstrike -tickrate 100 -ip 99.235.58.71 -port 27015 -maxplayers 6 +map de_dust2

Install command: HldsUpdateTool.exe -command update -game "Counter-Strike Source" -installdir C:\SRCDS

Bandwidth: 10mbps/1mbps

My router is my server (it is using Routing and Remote Access service).
Local IP is 10.147.0.1

I forwarded all the necessary ports through RRAS NAT port forwarding to the local machine (127.0.0.1).

Mods: Mani Admin Plugin

My server is running: Active Directory, DHCP, DNS, RRAS, Print/File Server. It has two network adapters one is WAN facing and one is LAN and uses NAT to connect the lan computers to the internet. CSS is installed on this server and I can connect to it from a lan computer through steam on the internet tab of the server browser but no one else can connect to it even if they use the IP to connect.

Please help me.

[Spartanfrog]

Get rid of the -ip in your command line.

[Hoglund]

you got sv_lan 0 ?

[john23]

sv_lan is set to 0 and I removed the -ip from the startup command, still not working. Any other ideas?

[Hoglund]

(07-15-2010, 07:35 AM)john23 Wrote:  sv_lan is set to 0 and I removed the -ip from the startup command, still not working. Any other ideas?

hmmm... Does it say "Server not responding" when other join...?
If so..you and I have the same problem

[john23]

Yes it does.

[loopyman]

I would assume a system like that has a firewall... Make sure you have your ports opened in your firewall.

[john23]

All the necessary porst were open on the firewall.

I managed to get it working. I must of mixed up some ports because I redid all the port forwarding through NAT on RRAS and everything works. But it only works when the ip parameter is not in the startup script, thanx for the help.