Some can connect...

[Muffen]

well, still not working :S

still got some tricks in your pocket?

[realchamp]

What's the name of your router?

[Muffen]

linksys model WMP54G version 4

[realchamp]

Try to do it as you did first time that it worked.

[Muffen]

the problem is that I havent changed anything from the day it worked exept install a dods server in another dir....

[realchamp]

Well you must have had changed something. Make sure your ISP's modem has it's ports forwarded correctly.

[Muffen]

how can I check that?

[lol554]

Alright.. so it must be somekind of dynamic port mapping.. go to 192.168.1.1 and check the ports

[Muffen]

all the ports are configuered as seen on the picture router.png

---

well I have tryed to install a new css server in the dir c:\cssserver

it has the same problem = noone can join, so it must be something with the router confirguration... but what?

[Branti]

(04-14-2010, 01:08 AM)Muffen Wrote:  Hello people

Unfortunately I got a little problem with my 2 servers.

The one as I started with is a css server with this command:
C:\srcds\srcds.exe -console -game cstrike +map de_dust2 -maxplayers 16 -autoupdate -tickrate 66 -ip 192.168.1.101 -port 27016

The other is a dods server as I started after:
C:\srcds1\orangebox\srcds.exe -console -game dod +map dod_kalt +maxplayers 16 -autoupdate -tickrate 66 - ip 192.168.1.101 -port 27016

I have configured all my ports and the PFP portchecker by portforward.com says they all are open.

when I just started the css (when I havent downloaded the dods server yet) it worked perfectly and all of my friends could join etc.

But when I downloaded the dods server and tryed to set it up, nothing suddenly worked.

I have tryed to give them seperate ports css=27016 and dods= 27017 with no luck.

Do some of you got a solution?

thanks!

I have alsp set up a static local IP which also is forwarded with the ports in the router configuration.

Hi try +ip you have -ip in your command!

[loopyman]

If 192.168.1.101 is the ONLY ip on that server, then just delete the -ip command entirely... I have seen strange issues with this in the past. I would organize my command line like this, although it doesn't matter. ( +ip and -ip are the same thing... BTW )

Code:

C:\srcds\srcds.exe -console -game cstrike -tickrate 66 -maxplayers 16 -port 27016 +map de_dust2

Try that command line... Like I stated before sometimes putting the IP in the command line on a private network will do strange things...
If you need anymore help, I might be able to assist you via Team Viewer.

[Muffen]

well now when I try to start the server an error occur that something is wrong with the UDP (think it was that)...

know why?

thanks!

[realchamp]

(04-16-2010, 07:53 PM)Muffen Wrote:  well now when I try to start the server an error occur that something is wrong with the UDP (think it was that)...

know why?

thanks!

Could be caused by several stuff. Either a TV port conflict, usually just means that two things are trying to use the same port

[Muffen]

arr ok, then I know what it is installet a new css server in another dir, maybe thats why

---

well it wasn't that... still got the same problem but its only with the css server, the dods server is working fine

[cookies911]

(04-17-2010, 03:58 AM)Muffen Wrote:  arr ok, then I know what it is installet a new css server in another dir, maybe thats why

---

well it wasn't that... still got the same problem but its only with the css server, the dods server is working fine

That wouldn't matter, unless your running both instances at the same time with the same CMD line.

I got the port error, well the above ran two instances at once that one time, and the TV port.