[problem on other ports now] no one can see me or join me

[markolo25]

hey guys, before i reformatted i had 1 server working, now after i reformatted nothing worked so i restarted the configs of my router loosing everything i had i'll provide the required info when some one replys to this post cause i'm still gathering the answers

these things i know on the top of my head
internal ip= 192.168.1.3
external ip:96.229.206.16
my proc is: amd phenom 9950
trying to host a css server but wants to later on host tf2 server
i have 4 gb memory
my router is the mi424wr
i'm running xp until i find a way to get 64 bit xp
i have fios
thats my PF screen shot

this is my speed test

[pengy]

Uhhh, DONT USE THE ACTION TEC ROUTER... EVER
It's nat table is small which only limits the connection to ~100 ports. When port forwarding, just enable Half-Life 2 and Half Life (add those predefined settings)

[markolo25]

the actiontec isnt really my router its actually my modem aswell so i dont have a choice.
its still not showing up, i'm gonna try just using the predefined half life 2\

i'm gonna reformat again to see if it will work lol

[St1flus]

i have one, works fine... open your firewall ports and also forward the ports manually, i did that =]

[pengy]

Once you get about 10 people in a server, and someone talks, the choke goes through the roof.

[markolo25]

thanks guys it works now what do you mean if someone chokes it will go through the roof

[pengy]

If alot of people go in, the choke keeps on raising because of the actiontecs small nat table size ( roughly about 400 ip connecitons compared to 4029 that a linksys gives) and it keeps on dropping some connections which causes choke.

[markolo25]

if youre still there 27015 works but when i make another one it uses 27016 and it dosen't work is there a way to make both servers use 27015

and thanks for bringing me to the right place.