SRCDS Steam group


How many slots?
#1
1st
CPU: Core2Quad 4x2.33 Ghz
RAM: 2 GB DDR2 800 Mhz
Hard Drive: 160 GB SATA
Bandwidth: 2000 GB
Speed of network: 10Mb
2nd
CPU: Core2Quad 4x2.33 Ghz
RAM: 4 GB DDR2 800 Mhz
Hard Drive: 160 GB SATA
Bandwidth: 2000 GB
Speed of network: 10Mb

How many CS:S slots TR100 can I hosts on each machine???
Reply
#2
i would say 240 total
Slå den med jeres fiberforbindelser...

[Image: 1308107839.png]
Reply
#3
How many CS:S slots TR100 can I hosts on 1st machine and on 2nd machine. I must know which will be better.
Reply
#4
(02-09-2010, 01:35 AM)franczez Wrote:  How many CS:S slots TR100 can I hosts on 1st machine and on 2nd machine. I must know which will be better.

The limiting factor is going to be the 10mbit network. I would suggest upping it to 100mbit.
[Image: banner.php?t=2&bg=002244&amp...p;id=82023]

[Image: banner.php?t=2&bg=002244&amp...p;id=82024]
Reply
#5
what core2quad is this exactly? Q8200?

the number of slots is not the quantity to ask for. in many cases, the number of servers is much more the limiting factor. If it's a Q8200, I guess you can't run much more then 4, at most 6 servers.

240 slots is an overestimation in any case, in my opinion. depends of course also very strongly on your quality demands.

btw: 2GB ram will be fine, no need to have 4. a server takes around 200-300 MB of ram, depending on the plugins. only if you host many public servers with many plugins, 4GB might be necessary.
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply
#6
yeah it's Q8200. I run public servers about 16-20 slots. How many servers can I host on 1st machine??? And how many bandwitch i need??

And how many slots can I run on machine like that:
1st
Pentium 4 2.80 Ghz
1 GB RAM
1 x 40GB ATA
Bandwidth: 1500 GB
Speed of network: 10Mb

2nd

Intel Pentium D 2x2.80
1 GB RAM
1 x 40GB ATA
Bandwidth:1500 GB
Speed of network: 10Mb
Reply
#7
(02-09-2010, 06:44 PM)BehaartesEtwas Wrote:  what core2quad is this exactly? Q8200?

the number of slots is not the quantity to ask for. in many cases, the number of servers is much more the limiting factor. If it's a Q8200, I guess you can't run much more then 4, at most 6 servers.

240 slots is an overestimation in any case, in my opinion. depends of course also very strongly on your quality demands.

btw: 2GB ram will be fine, no need to have 4. a server takes around 200-300 MB of ram, depending on the plugins. only if you host many public servers with many plugins, 4GB might be necessary.

Also map size will greatly affect memory usage... I have a customer who runs Mini Games maps on their server with little to no plugins at all ( big maps with falling stuff, and breakable brushes everywhere )

Their server alone eats 800 to 1200MB memory at any given time. I have verified the issue, and comparably a MinGames map mg_smashcannonsz uses 500MB more memory than a server running De_dust2.

Attached is a memory usage graph of an idle server running these kind of maps, over time if a map is never changed the memory usage seems to increase as well, as with any map I would assume...


Attached Files
.png   memorygraph.png (Size: 17.56 KB / Downloads: 15)
Looking for a game server? Visit fullfrag.com and pick one up as low as $2.50 / mo!
Reply
#8
looks like a memory leak in some plugin (what is minigames? it's either a plugin or a different game Toungue)

@franczez: Pentium 4 and Pentium D a very old machines. I wouldn't recommend buying them...
bandwidth: use the search function of this forums, there are many posts regarding the bandwidth.
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply
#9
I have a few choises.
1st
CPU: AMD Athlon 4850E 2x2,1 GHz
RAM: 2GB
Transfer: 500 GB/ month
Cost: 220 PLN
Speed of network: 10Mb
2nd

CPU: Core2Quad Q8200 4x2.33 Ghz
RAM: 2 GB DDR2 800 Mhz
Hard Drive: 160 GB SATA
Bandwidth: 2000 GB
Speed of network: 10Mb
Cost: 255 PLN
3rd
CPU: Core2Quad Q8200 4x2.33 Ghz
RAM: 4 GB DDR2 800 Mhz
Hard Drive: 160 GB SATA
Bandwidth: 2000 GB
Speed of network: 10Mb
Cost: 310 PLN

4th
CPU:Athlon 4400+/Dual Core E5300
RAM:2 GB RAM DDR2
Bandwitch 2000GB / 100Mbps
Cost 240PLN

5th
CPU:Athlon II X3 425 2,7GHz
RAM:2 GB RAM DDR2
Bandwitch 750GB
Cost 249 złPLN


So what you think. Which will be the best. I think performance/cost.
Reply
#10
What is PLN?
Looking for a game server? Visit fullfrag.com and pick one up as low as $2.50 / mo!
Reply
#11
I strongly recommend against AMD cpus, and I would also recommend a 100 MBit connection. So maybe you want to check out a different provider... :-)
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply
#12
-snip-
Server Sold...
Looking for a game server? Visit fullfrag.com and pick one up as low as $2.50 / mo!
Reply
#13
My last question.
Can I host 100 slots TR100 on this machine.
CPU: Intel DC E5300 2x 2.6 GHz
RAM: 2 GB
Connection: 2000GB / 100Mbps

??
Reply
#14
100 CS:S slots at 128FPS sure Toungue
Looking for a game server? Visit fullfrag.com and pick one up as low as $2.50 / mo!
Reply
#15
I hate this kind of questions Toungue You can always host virtually any number of slots on almost every half-decent machine. It is only a question what quality you expect. And then, as I said before, number of slots is not all... http://forums.srcds.com/viewpost/84776#pid84776
http://www.fpsmeter.org
http://wiki.fragaholics.de/index.php/EN:Linux_Optimization_Guide (Linux Kernel HOWTO!)
Do not ask technical questions via PM!
Reply


Forum Jump:


Users browsing this thread: 8 Guest(s)