Posts: 42
Threads: 10
Joined: May 2008
Reputation:
0
02-13-2011, 04:35 AM
(This post was last modified: 02-19-2011, 07:01 AM by Androide259.)
Hi
I'm having a bit of trouble with rcon. When i try to login to rcon (by entering rcon password ******) i always get Bad Rcon Password. i have changed the password several time and made several new server.cfg's, but no matter what i do nothing works. Any help would be appreciated.
Windows 7 x64
Intel core i3
RAM: 4gb
Counter Strike Source
srcds.exe -console -autoupdate +map cs_assault -game cstrike -maxplayers 12
Mani Admin Mod
Posts: 779
Threads: 5
Joined: Apr 2008
Reputation:
9
Did you open TCP @ port 27015. Command is rcon_password <pwd> in console. Did you add rcon_password <pwd> to your server.cfg?
Warning Level: 0%
Posts: 779
Threads: 5
Joined: Apr 2008
Reputation:
9
rcon password <pwd> should be rcon_password <pwd>
Warning Level: 0%
Posts: 2,031
Threads: 27
Joined: Nov 2008
Reputation:
17
make sure the right password appears if you type "rcon_password" at the server console. else you have some other rcon_password somewhere else in your config :-)
Posts: 2,031
Threads: 27
Joined: Nov 2008
Reputation:
17
if you have a dmz you have a router (with an integrated modem probably)...
can you post screen shots of the relevant router/modem configuration pages?
Posts: 2,031
Threads: 27
Joined: Nov 2008
Reputation:
17
you are forwarding port 27015 to 192.168.1.3, but that does not seem to be your IP...
also I would recommend not using a DMZ but only port forwardings, that should be enough (and much more secure).
Posts: 779
Threads: 5
Joined: Apr 2008
Reputation:
9
02-14-2011, 09:45 PM
(This post was last modified: 02-14-2011, 10:07 PM by Arjen.)
That is the problem indeed. Port forwarding to 192.168.1.3. Are you using a static local IP address? Remove DMZ and open the ports to 192.168.1.4.
Add +ip 192.168.1.4 to your startup line.
Warning Level: 0%
Posts: 42
Threads: 10
Joined: May 2008
Reputation:
0
ok i have made my ip static to 192.168.1.4 and taken it out of dmz but that has not fixed the problem. the server is showing the right ip and port.
Posts: 779
Threads: 5
Joined: Apr 2008
Reputation:
9
Did you add +ip 192.168.1.4? Did you open all the ports? Can't see all ports on the second picture.
UDP: 1200 (used for friends service)
UDP: 27000 to 27015 inclusive
TCP: 27020 to 27050 inclusive
UDP: 27015 and 27020 (default HLDS, SRCDS and HLTV port)
TCP: 27015 (SRCDS Rcon port)
Use your non local ip to connect to the server.
Warning Level: 0%
Posts: 2,031
Threads: 27
Joined: Nov 2008
Reputation:
17
do you actually try to connect from outside? most routers do not support port forwardings from the inside, so you have to connect to 192.138.1.4 if you are in the same network.
