Router & Poort probleem

[PandaNL]

Ik heb laatst een oude pc van mijn vaders werk gekregen, om hem te gebruiken als backup en om belangerijke bestanden op te slaan van elke pc + mac in mijn huis. Maar ook om er een T100 11 slot war server op te draaien via srcds (10 players, 1 source tv).

Dus srcds geinstaleerd, Zblock erop geinstaleerd en mani admin mod, en een war config. server start op, via mijn andere pc met cstrike zie ik hem gewoon tussen lan staan met het ip 192.168.2.5 (wat ik ook als static ip heb ingesteld op de server) maar mensen kunnen niet joinen op mijn echte ip 62.131.142.235:27015 (ikzelf kan ook niet joinen via dat ip)

ik start srcds op met de volgende command line

Code:

C:\srcds\srcds.exe -game cstrike -console +ip 192.168.2.5 -port 27015 -tickrate 100 -maxplayers 11 +map de_dust2

Nu zit ik achter een Router en een modem om precies te zijn.
-Modem: LinkSys ADSL2MUE (geeft mij een ip van 192.168.1.x)
-Router: U.S. Robotics Wireless MAXg Router USR5461 (geeft mij een ip van 192.168.2.x)
-Server: Pentium 4 @2,6ghz 256 MB Ram geheugen 37gb hdd
-Kabel Cat 6 ook geprobeerd met Cat5
-Provider Planet internet (KPN) 6mbit

modem


ik weet dat dit probleem bij mijn router moet liggen
ik heb de poorten toegevoegd van portforward.com
http://www.portforward.com/english/routers/port_forwarding/USRobotics/USR5461/Counter_Strike.htm
TCP 27020 to 27039
UDP 1200 to 1200
UDP 27000 to 27015

Maar wat ik ook aan mijn poorten verander het zal niet werken.

De server zelf


Zelf nog geprobeerd via DMZ en firewall uit maar nog steeds het zelfde probleem.

[roody]

u need to forward the ports from both your router and "modem"... Btw using the word "modem" confuses people, an adsl modem is the same as a router...
u need to forward the ports from you "gateway/modem/router" (the one wich is connected to your isp) to the ip of the second router and from your second to your server
example:
Router 1 (LinkSys ADSL2MUE): 27015 tcp -192.168.1.100 (router2's "external" ip)
Router 2 (U.S. Robotics Wireless MAXg Router...): 27015 - 192.168.2.101(Servers IP)
.. and all the other ports the same way..
i will recommend that you plug your server directly into the Linksys router instead (if only 1 port use a switch)

[PandaNL]

thnx for the quick reply, the problem is the adsl modem/router (linksys) doesnt have a porforward fuction. but i read somewhere there is a firmware with that option. i use version 4.12-eu btw

Edit: I updated my firmware with a special firmware i have know alot funtions like port forwarding etc etc i will try to open the ports.

are the port settings like this oke?

[roody]

im not sure, it will work with that IP, which you have chosen, since that is the routers internal (192.168.2.1) if you log into the router under status or something like that you should find its external (the one the linksys router gave it) which should be like 192.168.1.xxx..
still i recommend you connect your server directly to the linksys router, it will give better ping, less losses and less problems

[PandaNL]

roody Wrote:im not sure, it will work with that IP, which you have chosen, since that is the routers internal (192.168.2.1) if you log into the router under status or something like that you should find its external (the one the linksys router gave it) which should be like 192.168.1.xxx..
still i recommend you connect your server directly to the linksys router, it will give better ping, less losses and less problems

I dont know how i did it but people can connect now but i cant connect, only via lan lol.

[roody]

Here's a picture explain the IPs:

  sys.jpg (Size: 19.56 KB / Downloads: 9)

[roody]

okay nice
its proberbly either because it works with the internal IP or because there is only one device connectted to the linksys, and then portforwadding isn't nessecary
Good luck with your server

[PandaNL]

roody Wrote:okay nice
its proberbly either because it works with the internal IP or because there is only one device connectted to the linksys, and then portforwadding isn't nessecary
Good luck with your server

but is there a way to fix it so i can join via ip to i dont know if joining via lan is laggier for other people.

I played a clanwar with zBlock 4on4 with 1 spectater slot spectating but it lagged like hell for other people they had latecy like 240 and higher.

is it because the source tv is recording? or because i only have 256 mb ram ddr?

Thnx for your help