SRCDS Steam group


People cannot find my server in the serverlist! I have tried all..helppp
#16
First off, if you can successfully accept WAN connections (you said your friend can play as long as he knows the IP address) then technically you should be fine. Just try going to favorites, and adding your WAN IP Address w/port and see if it refreshes.

You might want to look into a dynamic IP service. Visit no-ip.com and download their client, it's free. Instead of telling your friends your IP address, they will just type something like "myserver.servegame.com" etc...

If you could tell us who your ISP is, that could help possibly. Some ISPs simply might block 27015 outgoing.

Finally, make SURE you understand completely what's going on network wise. You can open as many ports as you'd like, but nothing will happen until your router is specifically told to forward that data to your server. You should not need to mess with DMZ or any of that crap.

Good luck
Reply
#17
OK....thx for help.
But what is an WAN IP? (Im a NOOB at this)
And a ISP ? (trainingscenter.game-server.cc perhaps)

Now I have a dynamic IP: trainingscenter.game-server.cc
all the time. My friend has tried it and it works. My Dynamic DNS i get from http://www.dyndns.org and the updating Programm is DirectConnect 4.0 ....ok...one problem is fixed Wink thx!!! Smile

And can you please explain "...until your router is specifically told to forward that data to your server". SRY for my bad English Sad

And...ok I will the DMZ turn off again.

BIG THX

See Ya Michi




Reply
#18
ok....I have searched the Internet and found this picture http://www.netzwerkrouter.info/smc/bilder/config/7.jpg .I have the Router 7004ABR wich is very similar with this router. And in the picture I see that with the trigger port menu I can only open Incoming ports. Can I trie it with any software wich ports are outgoing opened? Or do I need just incoming ports?

See Ya Michi
Reply
#19
Ok, i was going to leave this, but then some ideas popped into my head that we could try.

Firstly, you use windows as a server, so, what happens if you try and run a direct connect and looking the server up on gametiger. By direct connect, i mean, plug your cable/DSL modem into the server, not a router. look your ip up on gametiger, if you still get bad results, then its one fo 2 things, your ISP (internet service provider) is filtering some of those ports. Not much you can do about that. The other thing that could be is, are you running softwalls? (software firewalls such as mcafee, zonealarm, norton, panda, windows firewall, etc.) if you are, try opening those ports up as well.

If you have no problems, i would look at server.counter-strike.net forums, there is an extensive post about certain routers that should help you. And just a little FYI, WAN stands for Wide Area Network. Your WAN IP is your public IP address.

EDIT: rereading your last post, outgoing AND incoming would be good.
[Image: userbar_wow.jpg]
starting 9/24/2006 if your problem has been solved please edit your first post and add [solved] to the begining of the title. Thanks.
Reply
#20
OK....thx for help. THe forum you gave me is very good! But I found several threads about the 7004ABR Router (I have) in wich stands that the 7004ABR doesn't work very well with srcds.
Here is a example: http://www.forumplanet.com/counterstrike/topic.asp?fid=4976&tid=1069300&p=1#11094771

......I can't make a direct connect, becuase my father won't allowed it (it is his PC ) Sad

My software firewall NORTON 2005 have I configured right(I think). I gave srcds.exe all Permittions!so...hmmm...can I trie to turn off the hardware firewall instead of a direct connect. Is it not he same?

My ISP is T-Online and I have DSL2000. (I hope this is ISP Rolleyes )



See Ya Michi

Reply
#21
Sounds like you're getting there. When you're looking at your router settings, all you want to look for is virtual servers. This is how it works for a typical residential (cable) connection:

Pretend you have two computers on your network:
Computer A - Your computer
Computer B - Your server

Let's also pretend that your network gateway address is 192.168.0.1. I'll also assume that you have one unique IP address that both computers on your network share when accessing the internet.

So locally, your two computers might have the following addresses...

Computer A - 192.168.0.100
Computer B - 192.168.0.101
--------------------------
Those are local addresses that your router issues to your computers in order to "direct" the incoming internet data, among other things.

Together Computer A and B will both SEND and RECEIVE from the internet or WAN (same thing) using the same IP address. The WAN IP address might look something like 69.24.117.69. This is the IP Address that is issued by your internet service provider or ISP. Your ISP might be America Online, Comcast, or Time Warner.

This is where virtual servers comes into play. If you are running a counter-strike server on Computer B (192.168.0.101), you will want to make sure that you have a virtual server enabled for private IP 192.168.0.101 (or whatever your server's local IP address is) and associate it with port 27015 for both TCP and UDP protocols.

Try all that first, then figure out if you have Windows Firewall running. If you have Service Pack 2 installed for Windows XP on your server, it will definetly prevent you unless specified.

Good luck
Reply
#22
THX for this explain. This realy helped me.
But one more question...what is DHCP which I have to disable?
And... yes I have Service Pack 2 installed but I turned off the Windows Firewall, because I use Norten2005 where srcds is permitted to have acess to the internet.


CIAO Michi

P.S.: I can not add all ports in Virtual Server, because they are too many and so I use Special Application too. Where I forward via triggerport 27015 and the rest of the ports!
Reply
#23
If you have a DHCP (Dynamic Host Configuration Protocol, fyi) server in your network, it will assign (local) IP's to all the clients/servers (sometimes even printers etc.) in your network, so you don't have to do it yourself.

This is just a (very) short explanation about the subject, visit our best friend if you want to learn more.
May the Source be with you...

Want to know which ports to forward on your router for a Source DS? Click here!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)