SRCDS Steam group


Can someone check my measurements on this chain
#1
2006 gsxr 750 manual says should be adjusted 20-30mm (0.8-1.2) inches if I’m not mistaken this is in spec then? Was a little tough to take the pic I am a new rider and want to ensure this is in spec before I configure my chain adjustment tool to say that this is in spec I honestly am not even certain if I’m measuring in the right spot or not yikes thanks for your help
believe it to be an inch
[Image: 241771-09421032b5f50f16adde32485d17800a.jpg][Image: 241772-397acdca5a8c250a5ba1c47985d66cd1.jpg]
Reply
#2
If your measurement is showing around an inch, it’s within spec for the manual’s 0.8-1.2 inches range. Just make sure you’re measuring at the midpoint between the sprockets, where the slack is most noticeable, and keep the tape measure perpendicular to the chain for accuracy.
If it’s tough to eyeball or hold everything steady, you could try https://ruler.onl/ to double-check the measurement in a pinch. It’s handy for quick checks when you don’t have a traditional ruler or tape measure on hand.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)