cfg file

[Captain_Scorch]

so i was pokeing around in my cfg file today and found some commands that i dont recognise or know what they do and wanted to see if any one could help.
sv_minrate 20000
// Min bandwidth rate allowed on server, 0 = unlimited. Default: 0
sv_maxrate 30000
// Max bandwidth rate allowed on server, 0 = unlimited. Default: 0
sv_minupdaterate 10
// Minimum updates per second that the server will allow. Default: 10
sv_maxupdaterate 100
// Maximum updates per second that the server will allow. Default: 60
sv_mincmdrate 66
sv_maxcmdrate 100

[nymand94]

Code:

sv_minrate 20000
// Min bandwidth rate allowed on server, 0 = unlimited. Default: 0

Is the minimum bandwith rate allowed on the server

Code:

sv_maxrate 30000
// Max bandwidth rate allowed on server, 0 = unlimited. Default: 0

Is the maximum bandwith rate allowed on the server

Code:

sv_minupdaterate 10
// Minimum updates per second that the server will allow. Default: 10

Is the minimum updates/second

Code:

sv_maxupdaterate 100
// Maximum updates per second that the server will allow. Default: 60

is the maximum udates/second

sv_mincmdrate 66 = i dont know


sv_maxcmdrate 100 = i dont know

[Captain_Scorch]

well i got an idea of what they are now but wanted to know what i should set my tickrate to cause if im right this and the tickrate some how connect. i looked on both the forums and google and found nothing on what to set your tick rate to or what the default tick rate is. i did find a nice guide on all the commands i listed but thats about it. will be grateful for any and all help.

[Spartanfrog]

Depends on the speed of your server's connection.

[Beaverbeliever]

I personally leave out the minimum stuff because not only are you having SRCDS fight your hardware, but SRCDS will aim for the highest setting on its own.

[Captain_Scorch]

i get a 18 down and 2 up most of the time but it likes to hop around alot on speed tests so im never that sure what im truly geting. but im geting off topic so ya think a 33 tick will be fine ? and also what about sv_maxrate and sv_minrate what should they be at i found a nice guide for both of the update ones but nothing on them.

[Spartanfrog]

How many slots?

[Captain_Scorch]

14 i tryed more before but after so many people join the server goes crazy and every ones ping jumps to 900 or so.

[Spartanfrog]

I would do 33 tickrate so your entire internet connection is not used by your server but you could experiment with more. Then you want your max update to be 33.

[Captain_Scorch]

thx a ton man also what about minrate and maxrate (not of the update kind) what do i set them to.